logo

Sealant Poliuretan Eksterior Elastis Bening untuk Penilaian Pergerakan Sambungan

Tempat asal: Tiongkok
Nama merek: YT
Sertifikasi: ISO9001, Work safety standardization certificate
Nomor model: Sealant Konstruksi Poliuretan
Kuantitas min Order: 50 metrik ton
Harga: Custom Product Production
Waktu pengiriman: Produksi yang disesuaikan tergantung pada situasi.
Syarat-syarat pembayaran: L/C, D/A, D/P, T/T, Western Union
Menyediakan kemampuan: Produksi Produk Kustom
Kirim Sekarang
Dapatkan Kutipan
Spesifikasi
Fitur-fitur Utama

Sealant poliuretan eksterior elastis

,

Sealant poliuretan eksterior ISO9001

,

Sealant poliuretan bening Penilaian Pergerakan Sambungan

Product Name:
Polyurethane Construction Sealant
Material System:
Polyurethane / PU
Components:
One-Component
Curing Method:
Moisture-Curing at Room Temperature
Elastic Recovery:
≥80%
Joint Width:
8–35 mm; detailed design requires confirmation
Packaging:
600 mL Foil Sausage
Application:
Construction Sealing and Construction Joint Sealing
Application Property:
Non-Sag
Deskripsi Produk

Elastic Polyurethane Construction Sealant untuk Joint Movement Assessment
 
Masalah
 
Construction joints can open and close as adjacent components respond to temperature changes and relative movement. Jika segel yang dipasang tidak dapat mengakomodasi deformasi yang sebenarnya,The bead may crack or separate from its bonding surfaces (Keliran mungkin retak atau terpisah dari permukaan ikatan).
Oleh karena itu, seleksi membutuhkan lebih dari sekedar memeriksa apakah material yang dikeringkan terasa fleksibel.Pembeli dan spesifikasi harus membedakan pemulihan setelah deformasi dari kemampuan gerakan yang dibutuhkan oleh sendi..
 
Penyebab
 
The relative deformation of a joint depends partly on its initial width. Pergeseran pembukaan yang sama menghasilkan perubahan persentase yang lebih besar di sendi yang lebih sempit.
Sebagai contoh, pembukaan sendi dari 10 mm ke 12 mm meningkat lebarnya sebesar 20%.it does not establish that this product has passed a ±20% movement classification or is suitable for that installation (itu tidak membuktikan bahwa produk ini telah lulus klasifikasi gerakan ± 20% atau cocok untuk instalasi tersebut).
 
Solusi
 
This one-component polyurethane sealant cures through atmospheric moisture to form an elastomer. The supplied document lists elastic recovery of ≥80%,Descriping recovery under the relevant test conditions Menggambarkan pemulihan di bawah kondisi tes yang relevan.
Hasil itu harus mendukung penjelasan spesifik pemulihan daripada klaim luas akomodasi gerakan tak terbatas.Adhesion information for the actual substrates (Informasi adhesi untuk substrat aktual)Elastic recovery tidak bisa menggantikan cek ini.
 
Spesifikasi Teknis
 

Parameter

Informasi yang diberikan

Arti dan Batasan Teknis

Nama produk

Polyurethane construction sealant

Konstruksi dan construction joint sealing

Sistem material

Polyurethane / PU

Membentuk elastomer setelah mengeras

Komponen

Satu komponen

No on-site two-component proportioning

Metode pengerasan

Moisture-curing di suhu kamar

Pengaturan penyembuhan tergantung pada kondisi aplikasi.

Pemulihan elastis

≥ 80%

Tidak berarti ± 80% kemampuan gerakan.

Lebar sendi

8 x 35 mm.

Tidak menetapkan kesesuaian untuk setiap sendi bergerak.

Properti aplikasi

Non-sag

Describe shape retention before curing (Menggambarkan retensi bentuk sebelum mengeras)

Kemasan

600 ml foil sausage

Coverage depends on actual bead cross-section. Coverage depends on actual bead cross-section. Coverage depends on actual bead cross-section

 
Aplikasi
 
The documented scope covers construction joint sealing. Where repeated opening and closing are expected, establish the design movement and confirm product suitability before installation. Di mana pembukaan dan penutupan berulang diharapkan, membangun gerakan desain dan mengkonfirmasi kesesuaian produk sebelum instalasi.
Assess substrate preparation, adhesion, and bead geometry together. A material deformation figure alone cannot resolve deficiencies in the bonding interface or joint design.
 
Cara Kerjanya
 
The cured seal deforms in tension and compression as the joint moves.while movement capability concerns performance during specified joint movement conditions (kemampuan gerakan sementara menyangkut kinerja selama kondisi gerakan sendi yang ditentukan)These measurements answer different selection questions and should not be treated as interchangeable. (Pengukuran ini menjawab pertanyaan seleksi yang berbeda dan tidak boleh dipertukarkan).
 
Cara Memilih
 
Determinate the installation width and expected maximum and minimum joint widths. Compare those requirements with the product's declared movement capability when available.
The listed 8×35 mm width range cannot independently establish allowable opening displacement. Joint depth and backing requirements also need separate determination.
Skenario Aplikasi
Evaluate the product for new construction joints or replacement of existing seals within the documented scope. Di mana sealant lama berulang kali retak, menyelidiki gerakan, adhesion,dan geometry manik sebelum hanya memasang bahan pengganti.
 
FAQ
 
Apakah pemulihan elastis yang lebih tinggi selalu berarti kemampuan gerakan yang lebih besar?
No. Review hasil tes yang relevan secara terpisah.

Can elongation at break be used as the design movement limit? Apakah elongasi pada istirahat dapat digunakan sebagai batas gerakan desain?
Deformasi diukur pada pecah tidak menetapkan rentang yang diizinkan untuk gerakan sendi berulang.

Produk terkait
Kirim Pertanyaan