logo

Uniwersalny uszczelniacz do PVC okienny, neutralny, do zastosowań w ciepłych i zimnych warunkach, do uszczelniania połączeń

Miejsce pochodzenia: Chiny
Nazwa handlowa: YT
Orzecznictwo: ISO9001, Work safety standardization certificate
Numer modelu: 338 butelkowane
Minimalne zamówienie: 50 ton metrycznych
Cena: Custom Product Production
Packaging Details: Standard Packaging
Czas dostawy: Produkcja dostosowana do indywidualnych potrzeb zależy od sytuacji.
Zasady płatności: T/T, Western Union
Możliwość Supply: Produkcja produktów na zamówienie
Zapytanie teraz
Zdobądź cytat.
Dane techniczne
Najważniejsze cechy

silikonowy uszczelniacz do okien

,

silikonowy uszczelniacz budowlany

,

silikonowy uszczelniacz do spoin

Nazwa produktu:
338 Uniwersalny uszczelniacz silikonowy
Rodzaj materiału:
Uszczelniacz silikonowy o neutralnym utwardzaniu
Typ komponentu:
Jednoskładnikowy, gotowy do użycia
Ciągła wydajność wytłaczania:
Zmierzone ≥420 ml/min
Stabilność stopki złącza:
≤ 3 mm
Odniesienie do czasu oprzyrządowania:
Zmierzono 0,5 godz
Zalecana grubość aplikacji:
Generalnie ≥6 mm
Aplikacja:
Montaż okien aluminiowych, uszczelnianie obwodowe i uszczelnianie złączy w budownictwie ogólnym
Opis produktu

Neutral Cure Silicone Sealant for PVC Windows: How Does a One-Component System Address Joint Leakage in High and Low Temperature Application?

 

Problem | Why Does Temperature Matter When Sealing PVC Window Joints Against Water Leakage?

 

Perimeter joints provide a sealing interface between PVC window frames and surrounding building substrates. When site temperatures change, not only the substrates but also sealant extrusion, bead formation, and surface curing behavior may be affected.

Interrupted extrusion, insufficient filling at corners, excessive sag on vertical joints, or moisture and contamination on bonding surfaces can create potential water-entry paths. For this reason, high- and low-temperature application should not be based only on a general “temperature resistant” claim. Defined application-performance data and proper joint preparation are more useful for evaluating the material.

 

Cause | How Can Temperature Changes Affect Silicone Sealant Application on PVC Windows?

 

Sealant extrusion and flow behavior can vary with temperature. Under lower-temperature conditions, application resistance may change. At higher temperatures, bead stability and surface curing behavior also require attention.

These factors are particularly relevant on vertical PVC window joints. Inconsistent extrusion or excessive sag can result in uneven sealant sections and incomplete filling.

The technical information for 338 Multi-Purpose Silicone Sealant states that the product provides good extrusion and thixotropic properties from −40°C to +40°C. Its sag is ≤3 mm, providing an additional quantitative reference for bead stability on vertical joints.

However, this range describes extrusion and thixotropic performance. It should not automatically be interpreted as an unrestricted recommended site-application temperature range.

 

Solution | How Should PVC Window Joints Be Sealed Under Different Temperature Conditions?

 

338 uses a one-component, neutral-cure silicone system, requiring no on-site component proportioning or mixing. Before application, PVC profiles and adjacent bonding surfaces should be clean and dry. Adhesion and compatibility should also be checked on the actual PVC substrate.

For continuous application, the specified extrusion requirement is ≥150 mL/min, while the measured result is ≥420 mL/min, providing quantitative evidence of extrusion performance. On vertical frame joints, sag ≤3 mm helps evaluate bead-shape retention. The measured skin-over time of 0.5 h provides a reference for tooling and subsequent site operations.

The technical information also recommends an application thickness of generally not less than 6 mm. This does not mean that applying more sealant automatically prevents leakage. Corners, frame connections, and bead termination points should be checked carefully to maintain a continuous sealing layer.

 

Technical Data | Which Parameters Support High and Low Temperature Application?

 

Property

338 Technical Data

Application Relevance

Product System

One-component, neutral cure

No on-site component proportioning required

Extrusion/Thixotropic Performance Range

−40°C to +40°C

Good extrusion and thixotropic behavior within the stated range

Extrusion Rate

Requirement ≥150 mL/min; measured ≥420 mL/min

Quantitative reference for continuous extrusion

Sag

≤3 mm

Indicates bead-shape retention on vertical joints

Skin-Over Time

Requirement ≤3 h; measured 0.5 h

Reference for tooling and subsequent operations

Recommended Application Thickness

Generally ≥6 mm

Helps avoid locally thin sealant sections

Storage Condition

≤27°C, dry and shaded

Defines recommended storage conditions before use

 

FAQ | Common Questions About PVC Window Sealing at Different Temperatures

 

Q1: Does −40°C to +40°C mean that 338 can always be applied on site throughout this entire temperature range?
No. The available technical information specifically describes good extrusion and thixotropic properties within this range. It does not define −40°C as an unrestricted minimum site-application temperature.

Q2: Is extrusion alone enough to determine whether the sealant can be used in cold conditions?
No. Substrate cleanliness, dryness, adhesion, compatibility, and actual site conditions must also be considered. Being able to extrude the material does not by itself guarantee a properly bonded joint.

Q3: What should installers pay attention to under higher-temperature conditions?
In addition to substrate conditions, bead formation should be checked after application. The ≤3 mm sag value provides a measurable reference for shape retention, but actual installation conditions and joint geometry should still be evaluated.

ZAŁĄCZONE PRODUKTY
Wyślij zapytanie