Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Neutral Mold-Resistant Silicone Sealant For Shower Glass Partition And Floor Tile Joints
Problem
Frameless and minimally framed shower glass partitions create an open bathroom appearance, but the connection between the lower glass edge and floor tile is positioned directly at the boundary between wet and dry areas.
During showering, water repeatedly flows toward the bottom of the glass. If the glass-to-tile connection contains open gaps, discontinuous sealant or areas of adhesion failure, water may pass along the lower edge and reach the dry side of the bathroom.
The joint is also repeatedly exposed to shower water, cleaning residues and high humidity. Rough or deeply recessed sealant surfaces can retain water and contamination, increasing the possibility of discoloration and mold contamination.
Because the connection remains visible through clear glass, joint continuity and finished appearance are also important.
Cause
Tempered glass and ceramic floor tile are different non-porous materials. Although both surfaces have relatively low water absorption, an installation space is normally required between the glass edge and tile.
Shower glass may also be connected to the floor through clamps, U-channels or other fixing systems. Minor contact, door movement or temperature changes can introduce small amounts of movement at these connections.
A completely rigid filler has limited ability to accommodate these changes and may develop stress along the joint edges.
Bathroom floors are also normally constructed with a drainage slope. An uneven sealant bead may interfere with surface drainage if excessive material is applied, while deep recesses can create localized areas where water remains.
The joint therefore requires a balance of flexibility, water resistance, drainage control and finished appearance.
Solution
Yuanteng Neutral Mold-Resistant Silicone Sealant is a one-component, neutral-curing silicone sealant suitable for flexible bathroom joints between compatible glass and tile surfaces.
After application between the lower glass edge and floor tile, the material reacts with atmospheric moisture and gradually cures into elastic silicone rubber.
A continuous bead covers the connection between the glass and floor, helping restrict shower water from migrating along the bottom edge toward the dry bathroom area.
The elastic cured structure can accommodate minor relative movement between glass and tile, helping reduce cracking associated with rigid joint fillers.
The mold-resistant formulation is intended for shower areas repeatedly exposed to water, humidity and cleaning products, helping reduce the risk of mold contamination on the exposed sealant surface.
For transparent shower partitions, clear silicone can provide a less visually prominent transition along the glass edge.
Specifications
|
Property |
Product Information |
|---|---|
|
Product Name |
Neutral Mold-Resistant Silicone Sealant |
|
Product Type |
One-Component Silicone Sealant |
|
Cure System |
Neutral Cure |
|
Appearance |
Smooth Paste |
|
Common Colors |
Clear / White |
|
Packaging |
Cartridge / Sausage |
|
Nominal Volume |
270 ml / 300 ml |
|
Main Application |
Waterproof and Mold-Resistant Sealing for Shower Glass Partition and Floor Tile Joints |
How It Works
Applied between the lower glass edge and floor tile, silicone sealant fills small irregular installation gaps.
Exposure to atmospheric moisture gradually converts the paste into an elastic silicone rubber joint.
When the glass experiences minor movement during normal use or temperature changes, the cured joint can respond through extension, compression or shear deformation.
The continuous bottom seal also helps restrict shower water from passing directly through the visible glass-to-tile connection.
The silicone joint is intended primarily for sealing. Loads from the glass partition should continue to be supported by the specified clamps, channels or other installation components rather than by the perimeter sealant.
Application Scenarios
The product is suitable for shower glass joints in residential buildings, hotels, apartments and commercial bathrooms. Typical applications include:
Shower glass partition-to-floor tile joints
Frameless shower screen bottom edges
Fixed glass panel-to-tile floor connections
Wet/dry zone shower glass boundaries
Perimeter joints around glass floor U-channels
Non-structural bathroom glass perimeter sealing
Before application, remove dust, moisture, soap residue, scale and other contaminants from the glass edge and tile surface.
Apply a continuous seal, paying particular attention to bottom corners and areas around fixing components.
Tool the joint to create a uniform, smooth surface while avoiding excessive sealant buildup that could interfere with the designed drainage path.