Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
YT-PV400 Photovoltaic Potting Material for Dust Protection of Electronic Components
Problem | Why Should PV Electronic Potting Consider More Than Moisture?
PV junction boxes and related electronic components may require protection not only from moisture but also from dust and other environmental contaminants.
If the potting material does not continuously cover the designed protection area, a thicker adhesive layer in another location cannot automatically compensate for the uncovered interface.
For this reason, photovoltaic potting material should be evaluated according to substrate compatibility, cured state, electrical insulation and environmental protection functions, rather than filling volume alone.
The available YT-PV400 information specifically describes moisture, dust and impact protection together with good electrical insulation.
Cause | Why Does Continuous Potting Matter for Dust Protection?
Dust can reach a protected area through openings or interfaces that are not adequately covered. The purpose of potting is therefore not simply to maximize adhesive quantity, but to continuously cover the area defined by the component design.
YT-PV400 is a one-component material. Its documented substrate range includes aluminum, glass, different types of backsheets, PPO/PA junction boxes and ceramic materials.
After curing, YT-PV400 forms an elastomer. Its documented dust protection and good electrical insulation make these functions relevant to photovoltaic electronic-component applications.
However, the current information does not provide an IP rating, dust-test duration, dielectric strength or volume resistivity. These values should not be added without supporting test documentation.
Solution | How Does YT-PV400 Form a Protective Potting Layer?
First, identify the area requiring protection and the materials that will directly contact the adhesive. Relevant application surfaces should be clean and dry.
YT-PV400 can then be applied for bonding, sealing or potting according to the component design, with continuous coverage of the required area.
After curing, the material forms an elastomeric layer. Its documented dust, moisture and impact protection together with good electrical insulation provides the basis for the intended protection functions.
Available packaging includes 400 ml cartridges, 4 kg pails and 270 kg drums.
Specifications
|
Item |
Specification |
|---|---|
|
Product Name |
YT-PV400 Photovoltaic Potting Material |
|
Product System |
One-Component |
|
Primary Materials |
PPO/PA Junction Boxes |
|
Other Listed Materials |
Aluminum, Glass, Backsheets, Ceramic, etc. |
|
Main Functions |
Potting, Sealing and Bonding |
|
Cured State |
Elastomer |
|
Electrical Property |
Good Insulation |
|
Protection |
Moisture, Dust and Impact Protection |
|
Cartridge |
400 ml/pc, 12 pcs/carton |
|
Pail |
4 kg/pail |
|
Drum |
270 kg/drum |
|
Storage |
Cool and Dry Conditions Below 27°C |
|
Color |
According to Customer Requirements |
How to Choose
First, confirm the actual contact materials. YT-PV400 specifically lists PPO/PA junction boxes together with aluminum, glass, backsheets and ceramic materials.
Second, identify the required protection functions. Where dust, moisture and electrical insulation are important, these requirements correspond to functions documented for YT-PV400.
Third, determine the potting area according to the actual component structure. Increasing adhesive quantity alone should not replace continuous coverage of the designed protection area.
Finally, choose between 400 ml, 4 kg and 270 kg packaging according to the production and dispensing process.
FAQ
Q1: Can YT-PV400 be used for potting inside PV junction boxes?
PPO/PA junction boxes are specifically listed in the available information, and potting is included among the documented product functions.
Q2: Can it be described as completely dustproof?
No. Dust protection is documented, but no specific IP rating or dust-test result is currently available.
Q3: Does YT-PV400 provide electrical insulation?
The available product information describes good electrical insulation. Numerical dielectric properties are not provided.
Q4: Does moisture and dust protection mean IP67 or IP68?
No specific IP rating can be claimed from the current information. Such a rating requires corresponding test evidence.