Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Polyurethane Construction Sealant | One-Component Moisture-Curing PU Sealant
Problem
Water leakage and cracked sealant in construction joints cannot always be resolved by applying more material. Buyers and installers must also consider joint movement, bead shape during application, and the curing requirements before subsequent work begins. Selecting a product solely for adhesion can overlook the relationship between sealant elasticity and joint design.
Cause
Adjacent building components may move as temperatures change, repeatedly stretching and compressing the sealant. Dust, laitance, or other residues can also weaken the bonding interface.
Moisture-curing products cure progressively from the exposed surface inward. A formed surface skin therefore does not demonstrate that the entire bead has cured. Loading or disturbing a joint prematurely may affect the developing seal.
Solution
This polyurethane construction sealant uses a one-component, moisture-curing system. It requires no on-site mixing of two components and reacts with moisture in the air to form an elastic seal.
The supplied keyword document lists elastic recovery of ≥80%. This describes recovery under the relevant test conditions; it does not establish allowable joint movement, service life, or performance across every substrate and exposure condition. Those conclusions require additional product and application evidence.
Technical Specifications
|
Parameter |
Supplied Information |
Selection or Application Note |
|---|---|---|
|
Product name |
Polyurethane construction sealant |
Construction sealing and joint sealing |
|
Material system |
Polyurethane / PU |
Cures to an elastomer |
|
Components |
One-component |
No two-component mixing required |
|
Curing method |
Moisture-curing at room temperature |
Cure development depends on application conditions and bead dimensions |
|
Elastic recovery |
≥80% |
Does not specify movement capability |
|
Joint width |
8–35 mm |
Joint depth and design require confirmation |
|
Application properties |
Non-sag; solvent-free |
No numerical VOC value or emission class established |
|
Packaging |
600 mL foil sausage |
Coverage depends on joint cross-section |
Application
The documented scope covers construction sealing and construction joint sealing. Before application, check that joint edges are sound and bonding surfaces are clean. Adhesion trials on the actual substrates help assess suitability. Primer requirements cannot be determined from the general material description alone.
How It Works
Atmospheric moisture participates in curing, gradually converting the applied material into an elastic seal. The cured bead accommodates movement through deformation rather than rigidly locking the components together. Effective sealing consequently depends on both the bond interface and the joint geometry.
How to Choose
Identify the substrates, joint width, anticipated movement, and exposure conditions before selecting the sealant. The listed 8–35 mm width range does not define the required joint depth or confirm suitability for every joint within that range.
Also distinguish handling requirements from full-cure requirements. A construction schedule should account for the bead dimensions and actual curing conditions.
Application Scenarios
Evaluate the product for initial construction joint sealing or maintenance of existing joints within the documented application scope. For repair work, investigate the original failure before resealing. Loose or poorly bonded old sealant should not simply be covered with a fresh bead.
FAQ
Does surface skin formation mean the joint is ready for service?
No. Readiness depends on cure development through the bead and the intended service conditions.
Does ≥80% elastic recovery mean ±80% movement capability?
No. Elastic recovery and movement capability are different measurements and cannot be converted directly.