Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Silane-Modified Polyether Sealant For Joint Sealing And Bonding On Multiple Metal Substrates
Problem|Can One Sealant Be Used Across Different Metal Substrates?
Metal structures may incorporate aluminum, stainless steel and coated steel within the same assembly. Buyers may seek a simpler material selection process, while applicators need suitable adhesion and bead formation.
A sealant with several listed substrates provides a useful starting point. However, using the same product across different surfaces still requires individual assessment. Multi-substrate suitability does not establish that every metal finish can be bonded without preliminary trials.
Cause|Why Can Adhesion Differ Between Surfaces with the Same Metal Description?
A sealant contacts the outermost surface of a component. This may be exposed metal, a metallic coating or a paint film. These surfaces present different bonding conditions, even when the underlying metal is identical.
Residual oil or a poorly attached coating can also affect the connection. Joint dimensions and loading arrangements introduce further variables. A satisfactory result on one sample therefore does not establish the performance of every production joint made from that metal.
Solution|Using the Listed Substrates and Material Data as Selection References
This product uses a one-component silane-modified polyether polymer system. The document identifies adhesion to aluminum, stainless steel, coated steel, zinc and copper, among other materials.
After seven days of curing at 23±2°C and 50±5% relative humidity, the reported tensile strength at break is ≥2.5 MPa and elongation at break is ≥300%.
These measurements describe tensile failure and deformation of the cured material. They do not establish the design load of a metal connection. The actual joint must also be evaluated for adhesion, bonded area and loading direction.
The listed sag value of ≤2 mm provides an additional reference for application behavior. Its relevance should be checked using the intended bead dimensions rather than treated as a guarantee for every joint configuration.
Specifications
|
Item |
Specification |
|---|---|
|
Product name |
One-Component Silane-Modified Polyether Sealant |
|
Polymer system |
Silane-modified polyether polymer |
|
Curing system |
One-component, moisture-curing, neutral-curing |
|
Sag |
≤2 mm |
|
Skin formation time |
5–15 min |
|
Tensile strength at break |
≥2.5 MPa |
|
Elongation at break |
≥300% |
|
Intended use |
Joint sealing, bonding and fixing in metal structures and other industrial applications |
Application|What Does the Metal Structure Application Reference Cover?
The document lists metal structures among the applications and describes sealing, bonding and fixing functions. It does not provide connection design data for load-bearing assemblies.
This reference therefore does not establish that the sealant can replace welds, bolts or other specified connections. Particular seams and fixing locations require confirmation against their joint requirements.
How to Choose|How Should Adhesion to Different Metal Finishes Be Assessed?
Prepare samples using the actual production substrates, including the same metallic coatings, paint films and surface treatment processes.
After curing, examine both the sealant and the interface. Distinguish between rupture within the sealant, separation at the bonding surface and detachment of the substrate coating itself. These observations help identify what needs further assessment before the joint is accepted.
FAQ|Does Multi-Substrate Suitability Mean Primer-Free Application?
No universal primer-free statement is provided in the document. Primer requirements and cleaning procedures should be established through trials on the actual substrates and the supplier’s application guidance.
Where subsequent painting is required, assess the intended coating separately for compatibility. Adhesion to a metal surface does not by itself establish compatibility with the paint applied over the sealant.