Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Bathroom Glass Partition Sealant: How To Reduce Bead Gaps And Edge Adhesion Failure At Glass-To-Metal Joints
Problem | Why Can Glass-To-Metal Connections Become Weak Points In Bathroom Partitions?
Bathroom glass partitions often combine glass, aluminum or other metal profiles, and adjoining wall materials.
The sealant must therefore establish a continuous joint between different substrates.
Checking adhesion only on glass may overlook the actual condition of the metal finish, creating the possibility of localized separation on one side of the joint.
Cause | Why Should Suitability Not Be Determined Only By The Term “Bathroom Glass Sealant”?
The actual bonding interface depends on specific materials and finishes.
Metal profiles may be anodized, coated, or otherwise treated. Glass surfaces can also vary. Sanitary-joint selection guidance similarly emphasizes matching sealants to the material and finish of the adjoining surfaces.
Solution | How Can Neutral Cure Chemistry And ≤3 mm Sag Support Glass-To-Metal Joints?
995 is a one-component, neutral cure silicone sealant.
Its sag value is ≤3 mm, providing a quantitative reference for shape retention in vertical partition joints.
The extrusion rate is ≥150 mL/min, relevant to continuous application along glass edges.
Tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C.
Actual glass and metal profiles should be checked before full application, and bonding surfaces should be clean and dry.
Technical Data | Which 995 Properties Matter For Bathroom Glass-To-Metal Joints?
|
Property |
Specification |
Application Relevance |
|---|---|---|
|
Cure Type |
Neutral Cure |
Multi-material joint reference |
|
Sag |
≤3 mm |
Vertical joint shape retention |
|
Extrusion Rate |
≥150 mL/min |
Continuous glass-edge application |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Tack-Free Time |
≤3 h |
Skin formation |
|
Application Temperature |
4–40°C |
Site application range |
|
Component |
One Component |
Direct application |
How To Choose | Should Glass Or Metal Be Evaluated First When Selecting Sealant For A Bathroom Partition?
Both sides of the joint should be considered.
Identify the actual material combination first, such as glass-to-aluminum, glass-to-metal frame, or glass-to-tile wall, and then verify adhesion to each surface.
Application | Where Can 995 Be Used On Bathroom Glass Partitions?
Typical locations include glass side edges, glass-to-metal profile connections, glass-to-wall joints, partition corners, and general bathroom glass installation joints.