Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Bathroom Glass Door Sealant: How To Reduce Bead Gaps And Local Adhesion Failure Along Glass Door Edges
Problem | Why Can Bead Gaps Develop At Corners And Connections Around Bathroom Glass Doors?
Bathroom glass doors often require sealant along glass edges, metal profile connections, and wall-side joints.
If application stops frequently or separate beads are not fully connected at corners, localized gaps can remain.
These weak points may be especially relevant at the bottom edge, side edges, and wall corners where multiple joints meet.
Cause | Why Do Glass Surface Conditions And Multi-Directional Joints Increase Application Difficulty?
Glass door joints often combine both vertical and horizontal sections.
The applicator must adjust direction and movement while maintaining continuous material delivery.
Cleaner residue, moisture, or dust on the glass may also interfere with direct sealant contact.
Solution | How Can 995 Support Bathroom Glass Door Edge Sealing?
995 is a one-component, neutral cure silicone sealant.
Its extrusion rate is ≥150 mL/min, providing a reference for continuous application along glass edges.
Its sag value is ≤3 mm, relevant to vertical side joints and wall corners.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C.
Glass, metal profiles, and wall-side surfaces should be clean and dry before application.
Technical Data | Which 995 Properties Matter For Bathroom Glass Door Joints?
|
Property |
Specification |
Application Relevance |
|---|---|---|
|
Product System |
One-Component Silicone |
Direct application |
|
Cure Type |
Neutral Cure |
Neutral silicone system |
|
Extrusion Rate |
≥150 mL/min |
Continuous glass-edge application |
|
Sag |
≤3 mm |
Vertical joint reference |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Tack-Free Time |
≤3 h |
Skin formation reference |
|
Application Temperature |
4–40°C |
Site application range |
How It Works | Why Should Bottom And Side Glass Door Joints Connect Continuously?
Although the bottom and side edges are applied in different directions, they function as one sealing system.
If the beads do not connect fully at the corner, a localized discontinuity can remain.
Application Scenarios | Where Can 995 Be Used Around Bathroom Glass Doors?
Typical locations include glass door edges, glass-to-metal profile joints, glass-to-wall joints, and corner connections.