Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Bathroom Renovation Sealant: How To Reseal Glass, Tile And Sanitary Fixture Joints After Removing Old Sealant
Problem | Why Can Applying New Sealant Directly Over Old Bathroom Sealant Leave Existing Joint Problems Unresolved?
During bathroom renovation, joints around glass partitions, wash basins, bathtubs, and sanitary fixtures may need resealing.
Applying new material directly over old sealant may cover visible defects while leaving loose existing material, contamination, or hidden voids unchanged.
Cause | Why Do Old Sealant Residues, Dust And Moisture Affect Resealing?
Renovation joints are different from new installation joints because residual sealant and contamination are already present.
If new sealant is applied over unstable old material, the new joint still depends on that weak layer.
Moisture remaining after cleaning can also interfere with the new bonding interface.
Solution | How Can 995 Be Used To Rebuild Continuous Bathroom Joints?
995 is a one-component, neutral cure silicone sealant suitable for relevant glass and sanitary fixture joints.
Its extrusion rate is ≥150 mL/min, providing a reference for continuous reapplication.
Its sag value is ≤3 mm, relevant to vertical glass edges and corners.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C.
Loose old sealant and contamination should be addressed before continuous reapplication to the prepared joint.
Technical Data | Which 995 Properties Are Relevant To Bathroom Resealing?
|
Property |
Specification |
Renovation Relevance |
|---|---|---|
|
Product System |
One-Component Silicone |
On-site resealing |
|
Cure Type |
Neutral Cure |
Neutral silicone system |
|
Extrusion Rate |
≥150 mL/min |
Continuous reapplication |
|
Sag |
≤3 mm |
Vertical resealing reference |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Tack-Free Time |
≤3 h |
Skin formation reference |
|
Application Temperature |
4–40°C |
Site application range |
How To Choose | When Should A Longer Failed Joint Be Reviewed Instead Of Only Repairing One Visible Crack?
If the issue is limited to a small local defect while the surrounding joint remains stable, local treatment may be considered.
If a longer section shows separation, loose old material, or multiple discontinuities, the entire failed area should be reviewed.
Application Scenarios | Where Can 995 Be Used During Bathroom Resealing?
Typical areas include shower glass edges, bathtub perimeters, wash basin joints, sanitary fixture-to-tile connections, and bathroom corners.