Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Shower Enclosure Bottom Sealant: How To Reduce Joint Gaps And Local Water Leakage At Glass-To-Floor Connections
Problem | Why Can Local Water Entry Develop Along The Bottom Of A Shower Enclosure Even After Sealing?
The bottom of a shower enclosure combines a relatively long horizontal joint with vertical joints at both ends.
Water frequently passes across these areas during shower use.
If the bottom bead contains insufficient filling, incomplete start/finish connections, or discontinuities where horizontal and vertical beads meet, localized weak points may remain.
Cause | Why Do Glass Bottom Edges, Tiled Floors And Corner Connections Make Application More Difficult?
A long horizontal joint requires continuous control of applicator movement and sealant delivery.
Moving too quickly can reduce local filling, while repeated stopping creates additional restart points.
Corners require particular attention because separate bead directions must connect continuously.
The actual joint may also combine glass, metal profiles, and tiled flooring.
Solution | How Can ≥150 mL/min Extrusion And Adhesion Data Support Shower Bottom Sealing?
995 is a one-component, neutral cure silicone sealant.
Its extrusion rate is ≥150 mL/min, providing a quantitative reference for continuous application along longer bottom joints.
Its sag value is ≤3 mm, relevant where the joint transitions into vertical sections.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C.
Bonding surfaces should be clean and dry before application.
Technical Data | Which 995 Properties Matter For Shower Enclosure Bottom Joints?
|
Property |
Specification |
Application Relevance |
|---|---|---|
|
Extrusion Rate |
≥150 mL/min |
Long horizontal application |
|
Sag |
≤3 mm |
Corner and vertical sections |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Tack-Free Time |
≤3 h |
Skin formation |
|
Application Temperature |
4–40°C |
Site application range |
|
Cure Type |
Neutral Cure |
Neutral silicone system |
|
Component |
One Component |
Direct application |
How It Works | Why Are Bottom-To-Side Connections More Important Than Simply Applying A Wider Bead?
The bottom joint works together with both vertical side joints.
A well-filled horizontal section can still contain a weak point if either corner connection is interrupted.
The bottom and side beads should therefore be treated as one continuous sealing path.
Application Scenarios | Where Can 995 Be Applied At The Bottom Of Shower Enclosures?
Typical areas include glass bottom edges, glass-to-bottom-profile joints, profile-to-tile connections, bottom corners, and horizontal-to-vertical joint transitions.