Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Bathroom Metal Profile Sealant: How To Reduce Edge Adhesion Failure And Joint Gaps At Shower Glass Connections
Problem | Why Can One-Sided Adhesion Failure Develop Between Shower Glass And Metal Profiles?
Shower enclosure joints do not involve glass alone.
Frames, channels, wall profiles, and bottom profiles introduce metal surfaces into the joint.
If the glass side receives proper preparation but the metal side does not, localized separation can occur on only one side of the bead.
Cause | Why Does The Actual Metal Profile Surface Matter More Than The General Term “Metal”?
Sealant bonds to the actual profile surface.
Dust, moisture, processing residue, or other contamination can interfere with direct contact.
Because glass and metal are different substrates, both sides of the joint should be evaluated separately.
Good contact on the glass side does not automatically confirm complete contact on the profile side.
Solution | How Can 995 Neutral Cure Chemistry And Adhesion Data Support Glass-To-Metal Profile Joints?
995 is a one-component, neutral cure silicone sealant.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C.
For long vertical profile edges, sag ≤3 mm provides an application reference for shape retention.
An extrusion rate of ≥150 mL/min provides a quantitative reference for continuous application along longer profile edges.
Both glass and metal bonding areas should be properly prepared before application.
Technical Data | Which 995 Properties Are Relevant To Shower Glass And Metal Profile Joints?
|
Property |
Specification |
Application Relevance |
|---|---|---|
|
Cure Type |
Neutral Cure |
Neutral silicone system |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Sag |
≤3 mm |
Vertical profile-edge application |
|
Extrusion Rate |
≥150 mL/min |
Long-profile continuous application |
|
Tack-Free Time |
≤3 h |
Skin formation |
|
Application Temperature |
4–40°C |
Site application range |
|
Component |
One Component |
Direct application |
How To Choose | How Should Sealant Be Evaluated For Glass-To-Metal Combination Joints?
Start by identifying both actual substrates.
Bathroom joints may include glass-to-metal profiles, metal profiles-to-tiled walls, or bottom profiles-to-tiled floors.
Then check surface condition and joint orientation. Vertical joints place greater emphasis on sag, while longer continuous edges make extrusion performance particularly relevant.
Application | Where Can 995 Be Used Around Bathroom Metal Profiles?
Typical applications include shower glass-to-metal profiles, wall-side profiles, bottom profiles, and related bathroom glass installation joints.