Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Problem | Why Can Bathroom Wall-To-Floor Joints Become Weak Points In The Sealing System?
Wall-to-floor connections form long horizontal corner joints that often connect with vertical wall corners.
During showering and cleaning, water can frequently reach these locations.
Localized bead gaps, incomplete filling, or disconnected corner transitions can interrupt the joint even when most of the visible bead appears complete.
Cause | Why Do 90-Degree Corners And Long Horizontal Joints Increase Application Difficulty?
At an internal corner, the sealant needs to contact both the wall-side and floor-side surfaces.
If application favors one side, contact on the opposite side may become incomplete.
Long horizontal runs also require controlled material delivery, while intersections with vertical joints introduce additional connection points.
Solution | How Can 995 Support Bathroom Wall-To-Floor Joint Application?
995 has an extrusion rate of ≥150 mL/min, providing a quantitative reference for continuous application along longer horizontal joints.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C.
Where horizontal joints connect to vertical corners, sag ≤3 mm also provides a relevant application reference.
Both wall and floor bonding surfaces should be clean and dry before application.
Technical Data | Which 995 Properties Matter For Bathroom Wall-To-Floor Joints?
|
Property |
Specification |
Application Relevance |
|---|---|---|
|
Extrusion Rate |
≥150 mL/min |
Long horizontal application |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Sag |
≤3 mm |
Vertical corner transitions |
|
Tack-Free Time |
≤3 h |
Skin formation |
|
Application Temperature |
4–40°C |
Site application range |
|
Cure Type |
Neutral Cure |
Neutral silicone system |
|
Component |
One Component |
Direct application |
How It Works | Why Should The Sealant Contact Both Wall And Floor Surfaces?
A wall-to-floor joint depends on two bonding interfaces.
Separation from either the wall or floor side can create a weak interface even if the visible central bead remains continuous.
Application Scenarios | Where Can 995 Be Used At Bathroom Wall-To-Floor Connections?
Typical applications include shower-area wall-to-floor joints, joints near sanitary fixtures, tiled internal corners, floor connections near glass partitions, and general bathroom corner joints.