Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
YT-PV400 Photovoltaic Sealant for Solar Panel Frame Bonding and Moisture Protection
Problem | Why Does a PV Module Frame Need Dedicated Sealing?
A photovoltaic module combines glass, framing, backsheet and other components, so frame sealing is not simply a matter of filling an empty joint. At interfaces such as an aluminum frame and glass, the adhesive must create continuous contact with the substrates while providing a sealed joint.
Selecting a PV sealant only on the basis of whether it can initially “stick” overlooks substrate compatibility, the condition of the cured material and the required environmental protection. These factors are especially relevant around module edges, where an incomplete sealing interface can leave areas exposed to moisture and dust.
Cause | Why Is the Material Interface Important?
YT-PV400 product information identifies aluminum, glass, different types of backsheets, PPO/PA junction boxes and ceramic materials among its applicable substrates.
For an aluminum-to-glass interface, the sealant therefore needs to be considered as part of the complete joint rather than as a simple gap filler. Continuous contact between the adhesive and both substrates is important for establishing the sealing interface.
The product information also states that YT-PV400 forms an elastomer after curing. This provides a technical basis for using the material where an elastic sealing layer is required instead of relying on a completely rigid joint.
Solution | How Can YT-PV400 Be Used for PV Module Frames?
YT-PV400 is a one-component photovoltaic sealant intended for applications including PV module frame sealing and related structural bonding. The one-component system eliminates the need for on-site mixing of separate A and B components.
Before application, bonding surfaces such as aluminum and glass should be clean and dry and free from dust or obvious contamination. The sealant should then be applied continuously according to the actual joint geometry so that sufficient contact with the relevant substrates can be established.
After curing, YT-PV400 forms an elastic material. The available product information also describes good electrical insulation together with moisture, dust and impact protection. The sealing process can therefore be considered as a sequence of substrate preparation, continuous adhesive application, elastic curing and interface protection.
Specifications
|
Item |
Specification |
|---|---|
|
Product |
YT-PV400 Photovoltaic Sealant |
|
System |
One-Component |
|
Material Type |
PV Sealing / Bonding / Potting Material |
|
Cured State |
Elastomer |
|
Applicable Substrates |
Aluminum, Glass, Backsheets, PPO/PA Junction Boxes, Ceramic, etc. |
|
Electrical Property |
Good Insulation |
|
Protection |
Moisture, Dust and Impact Protection |
|
Packaging |
400 ml / 4 kg / 270 kg |
|
Cartridge Packing |
400 ml each, 12 pcs/carton |
|
Storage |
Cool, dry conditions below 27°C |
|
Color |
Available according to customer requirements |
How It Works
The sealing mechanism can be understood as:
Substrate Contact → Elastic Curing → Continuous Sealing Interface
After application, YT-PV400 occupies the required sealing area between materials such as aluminum and glass. As curing proceeds, it forms an elastic sealing layer. For this reason, application quality depends not only on the quantity of adhesive used but also on continuous substrate contact and avoiding contaminated or interrupted sealing areas.
Application Scenarios
YT-PV400 can be used for PV module aluminum-frame sealing, glass-related bonding, module-edge sealing and related bonding operations during photovoltaic module production.
Packaging can be matched to different production requirements. The product is available in 400 ml cartridges, 4 kg pails, and 270 kg drums. The 270 kg drum format is particularly relevant to B2B content targeting bulk adhesive supply and industrial PV module manufacturing.