Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
YT-PV400 Solar Sealant for Glass PV Module Bonding and Sealing
Problem | Why Is the Visible Sealant Surface Not Enough to Evaluate Glass Bonding?
Glass is an important bonding substrate in photovoltaic modules. A continuous and smooth visible sealant bead does not necessarily mean that a complete bonding interface has been established between the glass and adjacent module materials.
Factors such as glass surface condition, adjacent substrate type, continuity of adhesive application and the condition of the cured sealant also need to be considered.
For example, when glass is bonded to an aluminum frame, dust, oil or other contamination on the glass can interfere with direct adhesive-to-glass contact. Applying more sealant does not correct an improperly prepared interface.
Cause | Why Does PV Glass Require Multi-Material Interface Control?
PV glass does not function as an isolated component. During module assembly, it is combined with frames and other materials. The sealant therefore operates within a glass–sealant–adjacent substrate interface.
The available YT-PV400 information specifically lists glass, aluminum, different types of backsheets, PPO/PA junction boxes and ceramic materials among its applicable substrates.
The same information states that YT-PV400 forms an elastomer after curing. Its role can therefore be understood as creating an elastic bonding and sealing layer between relevant module materials rather than simply forming a rigid filler around the glass.
Solution | How Can YT-PV400 Be Used for PV Glass Bonding?
YT-PV400 is a one-component photovoltaic sealing and bonding material. Before application, the actual material connected to the glass should be identified so that the adhesive can be applied according to the real joint configuration.
The bonding area should be clean and dry, with dust and obvious contamination removed. Continuous application is important so that the sealant reaches the designed bonding area and makes contact with the relevant substrates.
After curing, YT-PV400 forms an elastomeric layer between the glass and adjacent module materials. Available product information also describes good electrical insulation and protection against moisture, dust and impact.
Packaging can be matched to production volume. Available formats include 400 ml cartridges, 4 kg pails and 270 kg drums.
Specifications
|
Item |
Specification |
|---|---|
|
Product Name |
YT-PV400 PV Glass Bonding Sealant |
|
System |
One-Component |
|
Primary Substrates |
Glass and Aluminum |
|
Other Listed Substrates |
Backsheets, PPO/PA Junction Boxes, Ceramic, etc. |
|
Cured State |
Elastomer |
|
Main Functions |
Bonding, Sealing and Potting |
|
Electrical Property |
Good Insulation |
|
Protection |
Moisture, Dust and Impact Protection |
|
Cartridge |
400 ml/pc, 12 pcs/carton |
|
Pail |
4 kg |
|
Drum |
270 kg |
|
Storage |
Cool and Dry Conditions Below 27°C |
|
Color |
According to Customer Requirements |
How It Works
The basic bonding process can be described as:
Glass Surface Preparation → Continuous Adhesive Application → Contact with Both Substrates → Elastic Curing → Sealing Interface
Surface preparation and continuous substrate contact are particularly important. A visually complete bead should not automatically be treated as evidence of a complete internal bonding interface.
YT-PV400 is documented to form an elastomer after curing. However, the current product information does not provide numerical values for bond strength, tensile strength, elongation at break or movement capability, so these figures should not be added without supporting technical documentation.
How to Choose
First, identify the substrate combination. For a glass-to-aluminum joint, verify that the selected material is documented for both substrates. YT-PV400 lists both glass and aluminum.
Second, consider the cured condition. YT-PV400 forms an elastomer after curing, providing a documented basis for applications requiring an elastic sealing layer.
Third, match the packaging format to production volume. Available options are 400 ml cartridges, 4 kg pails and 270 kg drums.
Actual adhesion suitability should still be verified according to the specific glass type, surface condition and adjacent substrate before production-scale use.