Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
YT-PV400 PV Module Sealant for Bonding and Sealing Different Backsheet Materials
Problem | Why Should a PV Backsheet Adhesive Not Be Selected by Product Name Alone?
A common mistake in PV module manufacturing is to assume that any product described as a “PV adhesive” can automatically be used with every backsheet.
For backsheet-related bonding, the more important questions are whether the documented substrate range covers the required material, what type of layer is formed after curing, and whether the adhesive can establish continuous contact across the intended bonding area.
The amount of adhesive used cannot compensate for an improperly prepared or discontinuous bonding interface. Selection should therefore begin with the actual backsheet, adjacent substrate and joint configuration.
Cause | Why Does Backsheet Material Matter?
PV modules do not necessarily use one identical backsheet material. The supplied YT-PV400 information describes the product as applicable to different types of backsheets, while also listing aluminum, glass, PPO/PA junction boxes and ceramic materials.
This documented substrate range supports its use in multi-material PV module bonding and sealing applications. However, the actual backsheet type and surface condition should still be identified for a specific production process.
The supplied information also states that YT-PV400 forms an elastomer after curing. This provides a documented technical basis for describing the product as forming an elastic sealing layer rather than simply acting as a rigid filler.
Solution | How Can YT-PV400 Be Used for Backsheet Bonding and Sealing?
YT-PV400 is a one-component photovoltaic sealing and bonding material. Before application, the actual backsheet, bonding location and adjacent substrate should be identified.
Bonding surfaces should be clean and dry, with dust and obvious contamination removed. The adhesive should then be continuously applied to the required bonding or sealing area so that contact can be established with the relevant substrates.
After curing, YT-PV400 forms an elastomeric layer. According to the available product information, it also provides good electrical insulation and protection against moisture, dust and impact.
These documented characteristics provide a more appropriate basis for technical B2B content than unsupported claims such as “ultra-high bond strength” or “zero failure.”
Specifications
|
Item |
Specification |
|---|---|
|
Product Name |
YT-PV400 PV Module Sealant |
|
System |
One-Component |
|
Primary Substrates |
Different Types of Backsheets |
|
Other Listed Substrates |
Aluminum, Glass, PPO/PA Junction Boxes, Ceramic, etc. |
|
Cured State |
Elastomer |
|
Main Functions |
Bonding, Sealing and Potting |
|
Electrical Property |
Good Insulation |
|
Protection |
Moisture, Dust and Impact Protection |
|
Cartridge |
400 ml/pc, 12 pcs/carton |
|
Pail |
4 kg |
|
Drum |
270 kg |
|
Storage |
Cool and Dry Conditions Below 27°C |
|
Color |
According to Customer Requirements |
How It Works
The backsheet bonding process can be described as:
Identify Backsheet → Prepare Surface → Apply Adhesive Continuously → Contact Adjacent Substrates → Cure into an Elastomer
Substrate identification is the first step. Although the supplied information states that YT-PV400 can be used with different types of backsheets, this should not be interpreted as a reason to eliminate production-specific adhesion verification.
The current information confirms an elastomeric cured state but does not provide numerical tensile strength, elongation at break, movement capability or peel strength. These values should not be added without supporting technical documentation.
How to Choose
First, confirm whether the backsheet is included in the documented substrate range. YT-PV400 specifically identifies different types of backsheets.
Second, identify the adjacent substrate. Where the backsheet interface also involves aluminum, glass or another component material, both sides of the bonding interface need to be considered.
Third, consider the required cured condition and protective functions. YT-PV400 forms an elastomer and is described as providing good electrical insulation together with moisture, dust and impact protection.
Finally, match packaging to production volume. Available formats are 400 ml cartridges, 4 kg pails and 270 kg drums.