Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
YT-PV400 Photovoltaic Silicone Adhesive for Ceramic Component Bonding and Potting
Problem | Why Should Ceramic Substrate Compatibility Be Confirmed First?
Ceramic components have different surface characteristics from glass, aluminum and engineering plastics. Selecting an adhesive simply because it is described as a “photovoltaic sealant” does not confirm that ceramic is included in its documented substrate range.
Dust, oil or other contamination on a ceramic surface may also interfere with direct adhesive contact. For bonding, sealing or potting applications, the key considerations are therefore ceramic substrate compatibility, application continuity and the condition of the cured adhesive.
Cause | Why Does the Ceramic-to-Adhesive Interface Need Separate Consideration?
An adhesive joint is created through the complete ceramic surface–adhesive layer–adjacent component interface. Curing of the adhesive alone does not demonstrate that continuous contact has been established across the designed bonding area.
The available YT-PV400 information specifically lists ceramic materials among its applicable substrates. Aluminum, glass, different types of backsheets and PPO/PA junction boxes are also included.
The supplied information further identifies YT-PV400 as a one-component material that forms an elastomer after curing and provides good electrical insulation together with moisture, dust and impact protection.
Solution | How Can YT-PV400 Be Used for Ceramic Bonding and Potting?
Before using YT-PV400, identify the actual ceramic bonding area and the material on the opposite side of the joint. The application surface should be clean and dry, with obvious contamination removed.
For bonding, the adhesive should continuously cover the designed bonding area. For potting, material placement should follow the actual component geometry and required protection area rather than simply maximizing adhesive volume.
After curing, YT-PV400 forms an elastomeric layer between the ceramic and the relevant component.
Available packaging includes 400 ml cartridges, 4 kg pails and 270 kg drums, allowing the supply format to be matched to different production volumes.
Specifications
|
Item |
Specification |
|---|---|
|
Product Name |
YT-PV400 Photovoltaic Ceramic Bonding Adhesive |
|
System |
One-Component |
|
Primary Substrate |
Ceramic |
|
Other Listed Substrates |
Aluminum, Glass, Backsheets, PPO/PA Junction Boxes, etc. |
|
Cured State |
Elastomer |
|
Main Functions |
Bonding, Sealing and Potting |
|
Electrical Property |
Good Insulation |
|
Protection |
Moisture, Dust and Impact Protection |
|
Cartridge |
400 ml/pc, 12 pcs/carton |
|
Pail |
4 kg |
|
Drum |
270 kg |
|
Storage |
Cool and Dry Conditions Below 27°C |
|
Color |
According to Customer Requirements |
How It Works
The application process can be described as:
Identify Ceramic Substrate → Prepare Surface → Apply or Pot Continuously → Contact Target Components → Cure into an Elastomer → Form Protective Layer
A distinction should be made between “the adhesive has cured” and “the bonding interface has been correctly formed.” Effective bonding also depends on continuous contact with the intended substrate surfaces.
The current YT-PV400 information supports claims relating to an elastomeric cured state, good electrical insulation and moisture, dust and impact protection. It does not provide numerical ceramic bond strength, shear strength or peel strength, so these values should not be added without test documentation.
How to Choose
First, verify that ceramic is specifically included in the documented substrate range. YT-PV400 meets this requirement according to the supplied product information.
Second, identify the material on the opposite side of the joint. Where ceramic is bonded to aluminum, glass or another component, the complete material combination should be evaluated.
Third, determine whether electrical insulation or environmental protection is required. The available information supports good insulation and moisture, dust and impact protection.
Finally, select 400 ml, 4 kg or 270 kg packaging according to production requirements and dispensing method. Application-specific adhesion verification should still be completed before full-scale production.