Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
YT-PV400 Junction Box Sealant for Moisture Protection of PV Electrical Connections
Problem | Why Does the Electrical Connection Area Still Require Moisture Protection After Sealing?
A PV junction box is associated with the electrical connection system of a photovoltaic module. Checking only for a visible bead around the outside of the housing does not confirm that every required protection area has been continuously sealed.
Interrupted adhesive coverage, dust, oil or other contamination can interfere with direct contact between the sealant and the substrate.
For this reason, junction-box sealing should focus on substrate compatibility, continuous sealing, moisture protection and electrical insulation, rather than adhesive quantity alone.
Cause | Why Is Moisture Protection Related to the Sealing Interface?
Environmental protection depends on a continuous sealing interface. The adhesive needs to contact the PPO/PA housing and the relevant sealing areas so that a protective layer can form after curing.
The available YT-PV400 information specifically identifies PPO/PA junction boxes as applicable materials. It also describes the product as providing good electrical insulation and protection against moisture, dust and impact.
YT-PV400 forms an elastomer after curing, providing a documented basis for an elastic protective layer around relevant junction-box areas.
However, the available information does not specify an IP rating, water absorption value, insulation resistance or damp-heat lifetime. These should not be claimed without supporting test documentation.
Solution | How Can YT-PV400 Protect PV Electrical Connection Areas?
YT-PV400 is a one-component photovoltaic bonding, sealing and potting material.
Before application, identify the junction-box material and the actual area requiring protection. The application surfaces should be clean and dry.
The sealant should be continuously applied according to the junction-box geometry. Where potting is required, the material should cover the designed protection area.
After curing, YT-PV400 forms an elastomeric layer. Its documented moisture, dust and electrical insulation characteristics provide the basis for using it around relevant PV junction-box areas.
Specifications
|
Item |
Specification |
|---|---|
|
Product Name |
YT-PV400 PV Junction Box Sealant |
|
Applicable Materials |
PPO/PA Junction Boxes |
|
System |
One-Component |
|
Cured State |
Elastomer |
|
Main Functions |
Bonding, Sealing and Potting |
|
Electrical Property |
Good Insulation |
|
Protection |
Moisture, Dust and Impact Protection |
|
Other Listed Materials |
Aluminum, Glass, Backsheets, Ceramic, etc. |
|
Cartridge |
400 ml/pc, 12 pcs/carton |
|
Pail |
4 kg |
|
Drum |
270 kg |
|
Storage |
Cool and Dry Conditions Below 27°C |
|
Color |
According to Customer Requirements |
How It Works
The protection mechanism can be described as:
Identify Sealing Area → Prepare PPO/PA Surface → Continuous Sealing or Potting → Cover Target Area → Cure into an Elastomer → Form Moisture and Electrical Protection
Continuous coverage is more important than simply applying a thicker layer. A thick adhesive section in one location cannot compensate for an unsealed area elsewhere.
The supplied information supports moisture protection, dust protection and good electrical insulation. Numerical waterproofing or electrical ratings require separate test documentation.
How to Choose
First, identify the junction-box material. YT-PV400 specifically lists PPO/PA junction boxes.
Second, determine the required protection functions. The available information supports moisture, dust and electrical insulation applications.
Third, distinguish between joint sealing and potting. External sealing areas and internal potting locations can require different adhesive placement strategies.
Finally, select the packaging according to the production process: 400 ml cartridges, 4 kg pails or 270 kg drums.