Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
YT-PV400 PV Potting Compound for Impact Protection of Junction Box Components
Problem | Why Is Filling the Junction Box Not the Same as Effective Potting?
PV junction boxes contain components and areas that may require environmental protection. A common mistake in potting applications is to evaluate the process mainly by adhesive volume: if the internal space appears filled, the potting is assumed to be effective.
In practice, the result also depends on coverage of the target area, continuity of the potting material, substrate contact and the condition of the cured material.
If the required protection area contains obvious voids or interrupted adhesive coverage, a thicker layer elsewhere cannot compensate for the missing interface.
Cause | Why Do Cured State and Impact Protection Matter?
Potting around junction-box components may need to address moisture and dust while also providing the protective functions required by the component structure.
The available YT-PV400 information states that the material forms an elastomer after curing and provides moisture, dust and impact protection, together with good electrical insulation.
PPO/PA junction boxes are also specifically included in its documented application range.
These characteristics provide a technical basis for using YT-PV400 as a potting material around relevant junction-box components. However, “impact protection” should remain a qualitative claim because no numerical impact test data are currently available.
Solution | How Can YT-PV400 Be Used for Internal Junction Box Potting?
YT-PV400 is a one-component photovoltaic sealing and potting material.
Before application, identify the components and areas requiring protection. The relevant PPO/PA housing surfaces and application areas should be clean and dry.
During potting, the material should reach and continuously cover the designed protection area instead of simply maximizing filling volume.
After curing, YT-PV400 forms an elastomeric protective layer. Its documented moisture, dust, impact and electrical insulation characteristics can then be used to describe the intended protection functions.
Specifications
|
Item |
Specification |
|---|---|
|
Product Name |
YT-PV400 PV Junction Box Potting Compound |
|
Product System |
One-Component |
|
Primary Materials |
PPO/PA Junction Boxes |
|
Cured State |
Elastomer |
|
Main Functions |
Potting, Sealing and Bonding |
|
Protection |
Moisture, Dust and Impact Protection |
|
Electrical Property |
Good Insulation |
|
Other Listed Materials |
Aluminum, Glass, Backsheets, Ceramic, etc. |
|
Cartridge |
400 ml/pc, 12 pcs/carton |
|
Pail |
4 kg |
|
Drum |
270 kg |
|
Storage |
Cool and Dry Conditions Below 27°C |
|
Color |
According to Customer Requirements |
How It Works
The potting process can be described as:
Identify Protection Area → Prepare Surfaces → Continuous Potting → Cover Target Components → Cure into an Elastomer → Form Protective Layer
The elastomeric cured state is important because it is directly stated in the available product information. The same information also describes impact protection as a product function.
However, the source does not provide numerical impact strength, hardness, compression performance or vibration test data. Such values should not be added unless supported by the corresponding technical documentation.
Application Scenarios
YT-PV400 can be considered for potting relevant components inside PPO/PA photovoltaic junction boxes, particularly where moisture, dust, electrical insulation and impact protection are part of the application requirements.
Packaging can be selected according to the production process. Available formats include 400 ml cartridges, 4 kg pails and 270 kg drums.
The required potting depth, adhesive consumption per junction box and dispensing parameters should be determined according to the actual junction-box design because the current product information does not specify universal values for these factors.