Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
YT-PV400 Solar Frame Sealant for Aluminum-to-Glass Interface Bonding and Sealing
Problem | Why Does the Aluminum-to-Glass Interface Matter Even When Sealant Is Visible?
During solar module framing, glass and aluminum are two different substrates. The frame sealant needs to do more than occupy the designed space between them. It needs to establish continuous contact with both the aluminum and glass surfaces.
Interrupted application, dust, oil or other surface contamination can interfere with this contact. A visible external bead therefore does not by itself confirm that a continuous internal bonding and sealing interface has been formed.
For this reason, solar frame sealant selection should consider documented substrate compatibility, cured condition and production packaging, rather than relying only on the product name.
Cause | Why Must Both Aluminum and Glass Be Considered?
The frame bonding interface can be simplified as:
Aluminum → Adhesive Layer → Glass
If effective contact is not established on either side, the complete interface cannot be evaluated simply by looking at the cured adhesive.
The supplied YT-PV400 information specifically lists both aluminum and glass among its applicable substrates. Different types of backsheets, PPO/PA junction boxes and ceramic materials are also included.
YT-PV400 is a one-component material and forms an elastomer after curing. These documented characteristics provide a clearer technical basis for aluminum-to-glass frame bonding than unsupported descriptions such as “ultra-high strength.”
Solution | How Can YT-PV400 Be Used in Solar Module Framing?
Before framing, the glass edge and aluminum frame application areas should be clean and dry, with obvious contamination removed.
YT-PV400 is a one-component photovoltaic sealing and bonding material. It should be continuously applied to the designed frame bonding area so that the adhesive contacts both the aluminum and glass surfaces.
After curing, YT-PV400 forms an elastomeric layer between the two substrates.
Available packaging includes 400 ml cartridges with 12 pieces per carton, 4 kg pails and 270 kg drums. The 270 kg drum format can be considered for higher-volume production, while actual dispensing equipment and adhesive consumption should be determined according to the production line.
Specifications
|
Item |
Specification |
|---|---|
|
Product Name |
YT-PV400 Solar Frame Sealant |
|
Product System |
One-Component |
|
Primary Substrates |
Aluminum and Glass |
|
Other Listed Materials |
Backsheets, PPO/PA Junction Boxes, Ceramic, etc. |
|
Cured State |
Elastomer |
|
Main Functions |
Bonding, Sealing and Potting |
|
Electrical Property |
Good Insulation |
|
Protection |
Moisture, Dust and Impact Protection |
|
Cartridge |
400 ml/pc, 12 pcs/carton |
|
Pail |
4 kg |
|
Drum |
270 kg |
|
Storage |
Cool and Dry Conditions Below 27°C |
|
Color |
According to Customer Requirements |
How to Choose
First, check dual-substrate compatibility. An aluminum-to-glass joint requires a product with both materials included in its documented application range. YT-PV400 lists both aluminum and glass.
Second, consider the cured condition. YT-PV400 forms an elastomer after curing, providing a basis for an elastic bonding and sealing layer. This should not, however, be converted into a numerical movement rating without supporting test data.
Third, select the packaging format according to the dispensing process. Available formats are 400 ml, 4 kg and 270 kg.
Application Scenarios
This page specifically addresses bonding and sealing between aluminum frames and glass during photovoltaic module assembly.
Where a module also involves backsheets, PPO/PA junction boxes or ceramic components, these materials can be addressed through separate application pages. This allows keywords such as Solar Frame Sealant and PV Module Sealant to remain connected to specific technical applications rather than being repeated without context. Solar frame sealing is also included in the supplied application-keyword set.