Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
YT-PV400 Drum-Pack Photovoltaic Sealant for Continuous Adhesive Feeding
Problem | Why Does Continuous Production Require a Different Packaging Strategy?
In high-volume photovoltaic module manufacturing, frame bonding, glass sealing and junction-box applications may require repeated adhesive dispensing throughout the production process.
In this situation, sealant selection involves not only material characteristics but also whether the package capacity and adhesive supply method match the production process.
YT-PV400 is available in a 270 kg drum, in addition to 400 ml cartridges and 4 kg pails. This provides different packaging options for different production volumes.
Cause | Why Does a 270 kg Drum Not Automatically Fit Every Dispensing Line?
Large packaging addresses adhesive supply capacity. Continuous feeding, however, can also involve drum-handling equipment, pumps, hoses, metering units and dispensing heads.
YT-PV400 is a one-component material, so its product system does not require the A/B component ratio control associated with two-component adhesives.
However, this does not mean that a 270 kg drum can be directly connected to every dispensing system.
The available product information does not specify pumping pressure, recommended hose dimensions, dispensing rate or a standard drum pump. These parameters should therefore be determined according to the actual equipment rather than added as assumed product specifications.
Solution | How Should a 270 kg YT-PV400 Supply System Be Planned?
A practical process is:
Identify Application Station → Calculate Adhesive Consumption → Select 270 kg Packaging → Verify Dispensing Equipment → Set Application Process
YT-PV400 is documented for use with aluminum, glass, different types of backsheets, PPO/PA junction boxes and ceramic materials. Its main functions include bonding, sealing and potting.
After curing, the material forms an elastomer. The supplied information also describes good electrical insulation together with moisture, dust and impact protection.
The 270 kg drum should therefore be selected primarily as a bulk supply format, while suitability for each production station should still be evaluated according to substrates, joint design and application requirements.
Specifications
|
Item |
Specification |
|---|---|
|
Product Name |
YT-PV400 Drum-Pack Photovoltaic Sealant |
|
Product System |
One-Component |
|
Main Packaging |
270 kg/drum |
|
Other Packaging |
400 ml/pc, 12 pcs/carton; 4 kg/pail |
|
Applicable Materials |
Aluminum, Glass, Backsheets, PPO/PA Junction Boxes, Ceramic, etc. |
|
Main Functions |
Bonding, Sealing and Potting |
|
Cured State |
Elastomer |
|
Electrical Property |
Good Insulation |
|
Protection |
Moisture, Dust and Impact Protection |
|
Storage |
Cool and Dry Conditions Below 27°C |
|
Color |
According to Customer Requirements |
How to Choose
First, evaluate adhesive consumption. A 270 kg drum is not automatically necessary for a low-volume workstation.
Second, verify the dispensing equipment. Continuous feeding requires equipment compatible with the drum and actual material-handling requirements.
Third, consider the application station. Frame bonding, junction-box sealing and potting can require different dispensing arrangements.
Finally, remember that packaging size does not change the basic properties of YT-PV400. A 270 kg drum should not be interpreted as providing higher bonding strength, faster curing or longer service life than smaller packages.
Application Scenarios
The 270 kg YT-PV400 format is particularly relevant to high-volume PV module manufacturing, automated or semi-automated dispensing, and production stations with larger adhesive consumption.
For aluminum-frame and glass bonding, a compatible bulk feeding system can supply material to the dispensing point. Junction-box bonding, sealing or potting stations can also evaluate centralized adhesive feeding according to their actual process design.
The key distinction is that 270 kg/drum is a documented product packaging specification, while continuous feeding is an application method based on compatible production equipment.