Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Wood Floor and Skirting Board Joint Sealant | Neutral Silicone Edge Sealant
Problem
After wood flooring and skirting boards are installed, the interface between the two materials does not always form a perfectly continuous line. Minor variations in floor level, irregularities along the bottom edge of the skirting board or installation tolerances can leave narrow, discontinuous or uneven visible gaps.
Because these joints are located close to the floor, they can collect dust during normal use. Small amounts of moisture generated during routine floor cleaning may also enter open gaps, making the perimeter more difficult to maintain.
Wood flooring, however, can change dimensionally with variations in temperature and humidity. The entire perimeter should therefore not simply be filled with a rigid material.
The appropriate target is the visible decorative joint or localized finishing gap remaining after the flooring and skirting board system has been correctly installed.
Cause
Gaps between wood flooring and skirting boards are generally influenced by three main factors.
The first is floor flatness. Even when the completed floor appears visually level, minor localized height variations can remain. A relatively straight skirting board installed across these areas may therefore leave small gaps underneath.
The second factor is material and installation tolerance. Wood, PVC and composite skirting boards involve cutting, joining and fixing, while flooring must also be cut to suit the actual room geometry.
The third factor is different dimensional behavior. Wood flooring responds to temperature, humidity and moisture conditions, while skirting boards and wall systems may respond differently.
A suitable finishing material should therefore be capable of continuous application along narrow joints while remaining flexible after curing.
Solution
Neutral Silicone Joint Sealant uses a one-component, neutral-cure silicone system for suitable joints between wood flooring and the lower edge of skirting boards.
Before application, dust, sawdust, grease and loose contaminants should be removed from the flooring and skirting surfaces. The application area should be kept dry.
After cutting the nozzle according to the required joint size, the sealant can be continuously applied along the lower edge of the skirting board. The paste fills localized irregular gaps and establishes continuous contact with suitable surfaces.
After tooling and curing, the material forms a flexible silicone seal that improves the transition between the flooring and skirting board.
Its primary functions are localized gap filling, decorative edge finishing and flexible sealing. It is not intended to fix the skirting board or replace full-surface wood flooring adhesive.
Where the flooring system requires perimeter expansion space, the flooring manufacturer's installation requirements should continue to be followed.
Technical Specifications
|
Property |
Description |
|---|---|
|
Product Name |
Wood Floor and Skirting Board Joint Sealant |
|
Product Type |
Interior Decorative Joint Sealant |
|
Material System |
Silicone |
|
Component |
One-Component |
|
Curing System |
Neutral Cure |
|
Appearance |
Homogeneous Paste |
|
Application Method |
Sealant Gun Application |
|
Typical Application |
Wood Floor-to-Skirting Joints and Localized Perimeter Finishing |
Specific colors, packaging sizes, skin-over time, curing rate and mechanical properties should be confirmed according to the final product TDS and relevant test documentation.
How It Works
The joint between wood flooring and a skirting board is generally horizontal, narrow and variable in width.
After application, the silicone paste enters sealable spaces between the lower edge of the skirting board and the flooring surface. Continuous application and tooling create a consistent sealant line with contact along suitable surfaces.
As the neutral-cure silicone develops into a flexible sealing layer, it can accommodate normal minor relative changes between the flooring and skirting board through deformation.
The purpose of the sealant at this location is therefore to create a continuous flexible boundary, rather than rigidly connect the wood flooring to the skirting board.
Application Scenarios
Wood Flooring with Wooden Skirting Boards
For localized decorative finishing between wood flooring and the lower edge of wooden skirting boards. Adhesion testing is recommended for painted, oiled or otherwise treated wood surfaces.
Wood Flooring with PVC Skirting Boards
For small installation gaps below PVC skirting boards. Because PVC formulations and surface treatments vary, compatibility and adhesion should be checked on the actual material.
Wood Flooring with Composite Skirting Boards
For irregular narrow gaps between composite skirting materials and flooring, where controlled gun application can provide localized filling and finishing.
Skirting Board Corners
Internal corners, external corners and skirting board ends involve additional cutting and joining, making localized gaps more likely. Controlled sealant application can be used where appropriate.
Flooring Around Door Frames
Where skirting boards terminate near a door frame, multiple materials can meet in a small area. Suitable decorative gaps can be locally sealed after confirming substrate compatibility.