Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Polyurethane Construction Sealant For Existing Joint Resealing
Problem
When an existing construction joint develops cracks, detached edges, or missing sealant, covering the affected area can leave the original weak interface in place. If leakage returns, the repair may require another round of removal and installation.
Before resealing, establish whether the old material has failed, whether the substrate remains sound, and whether the exposed joint geometry supports a suitable replacement seal. The visible surface alone may conceal deeper cavities or damaged edges.
Cause
Old sealant residues, contamination, and weak substrate layers can interfere with adhesion. Unsuitable joint dimensions or movement beyond the selected material’s capability may also contribute to repeated failure.
Where compatibility between old and new materials has not been established, overlaying introduces additional uncertainty at the interface. Replacement should therefore include investigation of the original failure rather than treating every defect as a material replacement task.
Solution
This one-component polyurethane construction sealant cures through atmospheric moisture and is supplied in 600 mL foil sausages. It requires no on-site mixing of two components.
For repair assessment, remove failed material, inspect the bonding faces, and conduct adhesion trials on representative substrates. Apply a continuous bead using an approved cross-section. The documented 8–35 mm joint width range does not establish the required depth or confirm movement capability for the existing joint.
Technical Specifications
Parameter | Supplied Information | Relevance to Repair Selection |
|---|---|---|
Product name | Polyurethane construction sealant | Construction and construction joint sealing |
Material system | Polyurethane / PU | Forms an elastomer after curing |
Components | One-component | No on-site two-component proportioning |
Curing method | Moisture-curing at room temperature | Resealed joints require suitable curing arrangements |
Joint width | 8–35 mm | Remeasure after removal; depth requires separate determination |
Elastic recovery | ≥80% | Does not establish old-sealant compatibility or movement class |
Application property | Non-sag | Helps retain the applied bead shape |
Packaging | 600 mL foil sausage | Estimate quantities using the repaired joint geometry |
Application
Assess suitability for resealing existing construction joints. After removing old material, inspect edge damage, internal cavities, and residues that could affect the new bond.
Repair unsound substrate areas before sealant installation. Additional sealant cannot restore the strength of a loose or deteriorating joint edge.
How It Works
Resealing establishes a new, continuous bond between the replacement bead and sound joint faces. If the new material adheres only to a detachable old layer, that layer remains a potential failure point. Cured elasticity does not repair substrate damage.
How to Choose
Provide the supplier with the previous sealant type, substrate identity, and surface treatment information. Where the old material is unknown, assess compatibility rather than assuming it.
A representative trial section can help evaluate cleaning effectiveness, adhesion, and practical installation conditions before wider application.
Application Scenarios
Evaluate local replacement or full-length joint renewal. Local repairs require attention to transitions between retained and replacement material. Full renewal requires dimensional checks along the joint rather than relying on one measurement.
FAQ
Must every trace of old sealant be removed?
Remove failed and loose material. Retaining residues requires confirmed adhesion and compatibility.
When can the repaired joint be inspected?
Follow the required curing conditions and inspection procedure; surface skin formation alone is insufficient.