Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Curtain Wall Silicone Sealant: How Does Sealant Aging Affect Building Facade Performance?
Why Does Curtain Wall Silicone Age on Building Facades?
Curtain wall silicone sealant used in building facade projects remains continuously exposed to UV radiation, rain, temperature changes, and movement between facade components. Sealant aging is not simply a change in surface appearance. More importantly, the elastic seal, bonding interface, and movement accommodation need to remain functional.
If the cured sealant becomes hardened, cracked, or separated from the substrate, the continuous weather seal may be interrupted, increasing the risk of water penetration and joint failure.
For this reason, sealant selection for exterior facades should consider both long-term weather exposure and joint movement, rather than initial adhesion alone.
How Does Sealant Aging Develop into Joint Failure?
Facade joints are dynamic. Glass, aluminum panels, and metal profiles expand and contract with daily and seasonal temperature changes. The cured silicone therefore undergoes repeated extension–recovery–compression cycles.
If aging reduces the ability of the sealant to deform, the same joint movement can create greater stress concentration. Poor substrate preparation can further concentrate stress at the bond line, increasing the possibility of adhesion loss.
Therefore, sealant aging should not be evaluated only by appearance. Inspection should also consider hardening, cracking, edge separation, and the condition of the sealant after joint deformation.
Combine Weather Resistance with Movement Capability
378 High Performance Silicone Curtain Wall Weatherproof Sealant is a one-component, neutral-cure silicone sealant designed for weatherproof sealing of glass curtain walls, aluminum curtain walls, and building joints.
According to the supplied technical information, the product provides ±25% movement capability and ≥1.50 MPa tensile strength, with a stated classification of GB/T 14683, 25HM.
The ±25% movement capability provides a more specific engineering reference than simply describing the product as “highly elastic.” Within a properly designed joint, the cured silicone can extend and compress with cyclic facade movement, helping reduce stress concentration at the joint edges.
Material performance, however, cannot replace proper installation. Substrate compatibility and adhesion should be evaluated, bonding surfaces should be clean and free from contamination, and joint dimensions should correspond to the expected movement.
Technical Data
|
Property |
378 Technical Data |
Relevance to Facade Engineering |
|
Movement Capability |
±25% |
Accommodates cyclic facade joint movement |
|
Tensile Strength |
≥1.50 MPa |
Provides measurable tensile-performance data |
|
Cure System |
One-Component, Neutral Cure |
Suitable for on-site curtain wall sealing |
|
Temperature Description |
-40°C to +90°C |
Good extrusion and thixotropic properties within the stated range |
|
Tack-Free Time |
≤3 h |
Supports application and surface-curing control |
|
Standard / Classification |
GB/T 14683, 25HM |
Provides a technical reference for weatherproof sealant selection |
Application Guidance
378 curtain wall silicone sealant can be used for glass curtain walls, aluminum curtain walls, and exterior building joints, particularly where facade joints are exposed to both weathering and repeated movement.
For existing projects showing signs of sealant aging, applying new silicone directly over deteriorated sealant is not recommended. First determine whether the failure is cohesive cracking within the sealant or adhesive separation from the substrate. The deteriorated material and substrate condition should then be evaluated before resealing.
For long-term facade sealing, the engineering sequence should be: weather-resistant sealant selection → movement matching → substrate preparation → joint design → periodic inspection. This addresses the mechanisms behind sealant aging rather than relying on a single performance claim.