Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Exterior Facade Sealant: How to Manage Temperature Changes and Maintain Long-Term Bonding Stability
Why Do Exterior Facade Sealants Crack or Lose Adhesion After Temperature Changes?
Exterior facade joints are continuously exposed to changing environmental temperatures. Glass, aluminum panels, and metal profiles expand and contract as temperatures change. The key challenge is not a single high- or low-temperature event, but repeated joint movement caused by long-term temperature cycling.
If the exterior facade sealant cannot continuously accommodate this movement, stress can concentrate within the sealant or along the bonding interface, eventually increasing the risk of cracking, adhesion loss, and water penetration.
Therefore, long-term facade sealing should be evaluated through temperature behavior, movement capability, tensile performance, and joint design rather than “temperature resistance” alone.
Why Do Temperature Changes Affect Long-Term Bonding?
Building facades combine materials with different thermal expansion characteristics. As temperatures rise and fall, adjacent components undergo different dimensional changes, which are transferred to the sealant joint as extension and compression.
If the joint does not provide sufficient deformation space, stress can concentrate at the bonding interface even when the sealant itself performs under temperature changes. Dust, oil, contamination, or unsuitable backing materials can further reduce actual adhesion.
For this reason, long-term bonding stability cannot be demonstrated by one strength value alone. It depends on sealant properties, substrate adhesion, compatibility, and engineered joint geometry working together.
Combine Temperature Behavior, Movement Capability, and Interface Control
378 High Performance Silicone Curtain Wall Weatherproof Sealant is a one-component, neutral-cure silicone sealant. According to the supplied technical information, it provides good extrusion and thixotropic properties within -40°C to +90°C, together with ±25% movement capability and tensile strength of ≥1.50 MPa. The product is also identified as GB/T 14683, 25HM.
The -40°C to +90°C figure should not be interpreted independently as a guaranteed long-term service-life range. For facade engineering, it is more useful to consider temperature behavior together with the ±25% movement capability. When temperature changes cause joint expansion or contraction, the cured elastic sealant needs to deform with the joint instead of transferring excessive stress to the bonding edges.
Substrate adhesion should also be verified, bonding surfaces kept clean and dry, and joint width and depth designed according to expected movement.
Technical Data
|
Property |
378 Technical Data |
Relevance to Facade Engineering |
|
Temperature Description |
-40°C to +90°C |
Good extrusion and thixotropic properties within the stated range |
|
Movement Capability |
±25% |
Accommodates temperature-induced joint movement |
|
Tensile Strength |
≥1.50 MPa |
Provides measurable tensile-performance data |
|
Cure System |
One-Component, Neutral Cure |
Suitable for on-site facade joint sealing |
|
Standard / Classification |
GB/T 14683, 25HM |
Reference for weatherproof sealant selection |
|
Tack-Free Time |
≤3 h |
Supports application and surface-curing control |
FAQ
Q1: Does -40°C to +90°C mean guaranteed long-term service throughout this entire temperature range?
Not necessarily. The supplied data specifically states good extrusion and thixotropic properties within this range. It should not be expanded into an unsupported service-life claim.
Q2: Does higher tensile strength guarantee long-term adhesion?
No. ≥1.50 MPa provides tensile-performance data, while long-term adhesion also depends on substrate type, surface preparation, compatibility, joint geometry, and cyclic movement.
Q3: Why is ±25% movement capability important for exterior facades?
It provides a measurable reference for joint movement accommodation. In properly designed facade joints, the elastic sealant can extend and compress with temperature-induced movement, helping reduce stress concentration at the bonding interface.