Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Curtain Wall Sealant: How to Improve Long-Term Waterproof Sealing in Aluminum Curtain Wall Installation
Why Does Curtain Wall Sealant Fail Prematurely?
When water leakage occurs in an aluminum curtain wall, simply applying more sealant does not necessarily solve the underlying problem. Aluminum panels are continuously exposed to solar radiation, temperature changes, rain, and wind loads, resulting in repeated movement between panels and supporting frames.
If the curtain wall sealant cannot accommodate this movement, cracking or adhesion loss may gradually interrupt the continuous waterproof barrier.
Therefore, short service life should be investigated through sealant condition, joint movement, and bonding-interface performance rather than sealant quantity alone.
Why Can a Thick Sealant Joint Still Leak?
Effective waterproof sealing requires a continuous and deformable sealant layer with reliable adhesion to both sides of the joint.
Temperature changes cause aluminum panels to expand and contract. If the joint is too narrow, deformation can become concentrated. Improper sealant depth or three-sided adhesion can further restrict free movement and increase stress at the joint edges. Dust, oil, and other contaminants on aluminum surfaces may also reduce actual adhesion.
Consequently, a joint that appears watertight after installation can still fail prematurely when movement capability, joint geometry, and substrate preparation are not properly matched.
Build Long-Term Waterproofing Around Movement Capability
378 High Performance Silicone Curtain Wall Weatherproof Sealant is a one-component, neutral-cure silicone sealant. According to the supplied technical information, it provides ±25% movement capability, tensile strength of ≥1.50 MPa, and a stated GB/T 14683, 25HM classification.
For aluminum curtain walls, ±25% movement capability does not simply mean that the sealant is “softer.” Within a properly designed joint, the cured silicone can extend and compress as panels move, helping reduce long-term stress concentration at the bonding edges.
The supplied information also states good extrusion and thixotropic properties within -40°C to +90°C, providing a measurable reference for application conditions.
These values, however, should not be converted into an unsupported fixed service-life claim. Long-term waterproofing still depends on joint engineering, substrate preparation, and application quality.
Technical Data
|
Property |
378 Technical Data |
Relevance to Waterproof Sealing |
|
Movement Capability |
±25% |
Accommodates cyclic aluminum joint movement |
|
Tensile Strength |
≥1.50 MPa |
Provides measurable tensile-performance data |
|
Cure System |
One-Component, Neutral Cure |
Suitable for on-site curtain wall sealing |
|
Temperature Description |
-40°C to +90°C |
Good extrusion and thixotropic properties within the stated range |
|
Standard / Classification |
GB/T 14683, 25HM |
Reference for weatherproof sealant selection |
|
Tack-Free Time |
≤3 h |
Supports application and surface-curing control |
How to Select Sealant for Aluminum Curtain Walls
First, determine expected joint movement before selecting the movement class. Panel dimensions, temperature variation, and joint configuration all influence actual movement. For dynamic joints, measurable data such as ±25% movement capability is more useful than a general “high elasticity” claim.
Second, do not substitute tensile strength for movement capability. ≥1.50 MPa describes tensile performance, while movement capability relates more directly to repeated joint deformation.
Third, evaluate joint geometry and substrates. Aluminum surfaces should be clean, dry, and suitable for bonding. Joint width, depth, backing materials, and adhesion configuration should also be controlled to avoid restricted deformation.
Finally, avoid unsupported service-life claims. Without corresponding durability test data, a sealant should not simply be described as providing “10 or 20 years without leakage.” A more reliable selection process is: expected movement analysis → movement-class matching → joint design → substrate adhesion verification → application quality control → periodic inspection.