logo

42 ShoreA Curtain Wall Silicone Sealant High Rise Buildings Structural Silicone

Place of Origin: China
Brand Name: YT
Certification: ISO9001, Work safety standardization certificate
Model Number: 378bottled
Minimum Order Quantity: 50 metric tons
Price: Custom Product Production
Packaging Details: Standard Packaging
Delivery Time: Customized production depends on the situation.
Payment Terms: L/C, D/A, D/P, T/T, Western Union
Supply Ability: Custom Product Production
Inquiry Now
Get A Quote
Specifications
Highlight Features

42 ShoreA Curtain Wall Sealant

,

ISO curtain wall silicone sealant

,

High Rise Buildings structural silicone

Product Name:
398 Silicone Structural Sealant
Tensile Adhesion Strength:
0.95 MPa(23℃)
Elongation At Maximum Strength:
145%
Adhesion Failure Area:
0%
Shore A Hardness:
42
Sag:
0 Mm
Tack-Free Time:
0.5 H
Application:
Structural Bonding For Glass Curtain Walls, Aluminum Curtain Walls And Metal Structures
Product Description

Structural Glazing Silicone Sealant: Managing UV Aging Risks in Unitized Curtain Walls for High-Rise Buildings
 
Problem | Why Does Sealant Aging Matter in High-Rise Unitized Curtain Walls?
 
In unitized curtain wall installation, glass panels, aluminum frames, and structural bonding systems are typically assembled under factory-controlled conditions before complete units are transported and installed on site. In high-rise buildings, curtain wall systems remain exposed to sunlight, temperature changes, and wind loads over extended periods.
If the structural glazing silicone sealant experiences performance degradation, the bonding interface between the glass and frame may be affected. UV aging therefore should not be addressed simply by describing a product as “UV resistant.”
Weathering resistance also does not automatically establish a fixed outdoor service life. Structural design should consider initial adhesion performance, tensile deformation behavior, substrate compatibility, and the actual exposure conditions of the structural joint.
 
Cause | Why Can UV Exposure Affect Structural Bonding Performance?
 
Unitized curtain walls are continuously exposed to solar radiation, while differences in thermal expansion between glass and aluminum generate relative movement. For high-rise and super high-rise facades, design wind loads also create additional stresses on glass panels and structural bonding areas.
Aging risk therefore results from the combined effects of environmental exposure, temperature variation, structural loading, and interface conditions. Inadequate joint dimensions, contaminated substrates, or unverified compatibility between silicone and project-specific coatings can increase the risk of localized stress or adhesion failure.
 
Solution | Use Measurable Structural Data for High-Rise Sealant Selection
 
398 Silicone Structural Sealant is a one-component, neutral-cure structural silicone designed for glass curtain walls, aluminum curtain walls, and various metal structural applications. The supplied product information also identifies weather-aging resistance as one of its performance characteristics.
At 23°C, its measured tensile adhesion strength reaches 0.95 MPa, compared with a requirement of ≥0.60 MPa. Elongation at maximum strength reaches 145%, compared with a ≥100% requirement, while the recorded adhesion failure area is 0%.
These values provide measurable references for structural adhesion, deformation behavior, and bonding-interface performance. For high-rise unitized curtain walls, however, product data should be combined with project-specific adhesion and compatibility testing. Structural joint dimensions must also be calculated according to panel size, design wind load, substrate configuration, and facade engineering requirements.
 
Technical Specifications
 

Property

Requirement

Typical Result

Cure Type

Neutral Cure

Neutral Cure

Components

One Component

One Component

Tensile Adhesion Strength at 23°C

≥0.60 MPa

0.95 MPa

Elongation at Maximum Strength

≥100%

145%

Adhesion Failure Area

≤5%

0%

Shore A Hardness

20–60

42

Sag

≤3 mm

0 mm

Tack-Free Time

≤3 h

0.5 h

Extrusion Rate

≥120 mL/min

≥490 mL/min

 
 
How It Works | How Does Structural Silicone Respond to Long-Term Facade Exposure?
 
After curing, structural silicone forms a continuous bonding layer between the glass and aluminum frame. Wind loads acting on the glass are transferred through the bonded silicone area to the unitized framing system. When temperature changes produce relative movement between glass and aluminum, the structural silicone must maintain bonding continuity during tensile deformation.
For this reason, the 0.95 MPa tensile adhesion strength and 145% elongation at maximum strength should be evaluated together. The first provides measurable evidence of structural adhesion under specified test conditions, while the second describes deformation behavior during tensile loading.
The available product data identifies weather-aging resistance but does not provide a specific UV exposure duration or verified high-rise service-life period. Therefore, a technically accurate claim is that the product can be evaluated for structural bonding in high-rise curtain wall applications, rather than claiming a fixed UV-resistant service life without supporting test data.

Related Products
Send An Inquiry