Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Problem | Why Can Water Paths Develop Around PVC Window Frames?
PVC window perimeters contain corners, transitions, and vertical joints. Discontinuous application, underfilled areas, or contaminated bonding surfaces can leave hidden paths for water even when the visible surface appears sealed.
Cause | Why Are Corners and Vertical Joints Critical?
Application direction changes at corners can interrupt the bead, while vertical joints require sufficient shape retention. The ≤3 mm sag value provides a reference for vertical bead stability, while the measured ≥420 mL/min extrusion rate supports continuous application.
Solution | How Can a Continuous PVC Window Seal Be Formed?
Clean the PVC and adjacent substrates and verify adhesion and compatibility on the actual profile. Sealant should continuously fill corners and transitions. The recommended thickness of generally ≥6 mm provides a reference for avoiding thin sections.
Technical Data
|
Property |
Data |
Application Value |
|---|---|---|
|
System |
One-component, neutral cure |
Direct application |
|
Sag |
≤3 mm |
Vertical bead formation |
|
Extrusion |
Measured ≥420 mL/min |
Continuous application |
|
Thickness |
Generally ≥6 mm |
Joint dimension reference |
|
Skin-Over |
Measured 0.5 h |
Tooling reference |
How It Works | How Does the Sealant Block Water Paths?
The sealant is continuously applied into the joint and cures while maintaining contact with both bonding surfaces. Continuity and interface adhesion, rather than surface coverage alone, are essential to limiting potential water-entry paths.