Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
338 Multi-Purpose Silicone Sealant For Building Window Installation: Understanding Extrusion And Thixotropic Performance From −40°C To +40°C
Problem | How Should a “Multi-Purpose” Sealant Be Evaluated for Building Window Installation?
Window installation includes aluminum frames, perimeter joints, corners, horizontal sections, and vertical joints. Terms such as “multi-purpose” or “high and low temperature” should not be interpreted as universal suitability for every substrate, temperature, or joint condition.
A technical product page should instead identify what each available parameter actually demonstrates.
Cause | What Do the Key 338 Application Data Mean?
338 is a one-component, neutral-cure silicone sealant. Its product information states good extrusion and thixotropic properties from −40°C to +40°C. This specifically describes these properties and should not be converted into an unrestricted recommended application-temperature range.
Its extrusion requirement is ≥150 mL/min, with a measured result of ≥420 mL/min. Sag ≤3 mm describes vertical bead retention, while the measured 0.5 h skin-over time provides a reference for surface formation and tooling.
Solution | How Should These Parameters Be Used in Building Window Projects?
Actual substrates and joint conditions should be evaluated before application. Bonding surfaces should be clean and dry, with adhesion and compatibility verified where required.
The recommended application thickness is generally ≥6 mm, although actual joint dimensions should follow project design.
For storage, 338 should be kept at ≤27°C in a cool, dry environment, with a 9-month shelf life. Storage temperature, extrusion/thixotropic performance range, and actual site application conditions should therefore be treated as separate technical concepts.
Technical Data
|
Key Property |
338 Data |
Correct Use |
|---|---|---|
|
System |
One-component, neutral cure |
Product classification |
|
Extrusion/Thixotropic Range |
−40°C to +40°C |
Extrusion/thixotropic behavior |
|
Extrusion |
Measured ≥420 mL/min |
Material output |
|
Sag |
≤3 mm |
Vertical bead control |
|
Skin-Over |
Measured 0.5 h |
Tooling reference |
|
Recommended Thickness |
Generally ≥6 mm |
Joint-section reference |
|
Storage |
≤27°C, cool and dry |
Product storage |
|
Shelf Life |
9 months |
Inventory planning |
FAQ
Can 338 be promoted as suitable for application at any temperature from −40°C to +40°C?
Not based on the available information. The range specifically describes extrusion and thixotropic properties.
Does “multi-purpose” mean every construction substrate can be used without testing?
No. Actual substrate adhesion and compatibility should still be verified.