Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Why Does Joint Quality Vary With the Same Sealant? Application Parameters vs. Product Claims
Problem | Why Can Joint Quality Differ Even When the Same Sealant Is Used?
Sealant selection alone does not determine installation quality. Extrusion continuity, tooling timing, and vertical bead formation can all affect the completed joint.
Cause | Which Data Actually Describe Application Performance?
For 338, the measured extrusion rate is ≥420 mL/min, sag is ≤3 mm, and measured skin-over time is 0.5 h. These parameters describe different aspects of application and should not be treated as interchangeable performance claims.
Solution | How Can Technical Data Be Used for Site Control?
Maintain continuous application on long perimeter joints, inspect vertical beads after application, and complete tooling according to actual surface formation.
The 0.5 h result describes skin-over time and does not mean complete cure in 30 minutes.
Technical Data
|
Performance |
Data |
Application Stage |
|---|---|---|
|
Extrusion |
Measured ≥420 mL/min |
Continuous application |
|
Sag |
≤3 mm |
Vertical joints |
|
Skin-Over |
Measured 0.5 h |
Tooling |
|
Thickness |
Generally ≥6 mm |
Joint dimension |
|
System |
One-component |
No mixing |
FAQ | Common Application Questions
Does ≥420 mL/min prove waterproof performance?
No. It is an extrusion-performance value.
Does 0.5 h mean full cure?
No. It refers to skin-over time.
Can it automatically bond to every PVC profile?
No. Adhesion and compatibility should be verified on the actual substrate.