Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Neutral Cure Silicone Sealant for Vertical Window Joints: One-Component System for Sag Control and Bead Formation
Problem | Why Can Vertical Window Sealant Beads Sag or Become Uneven?
Unlike horizontal joints, sealant on vertical surfaces must retain its shape before curing progresses. Insufficient thixotropic behavior or bead stability may cause downward deformation and uneven sealant sections.
Cause | Which Data Should Be Used to Describe Sag Resistance?
For 338, the technically accurate statement is sag ≤3 mm, rather than an absolute claim such as “no sag under all conditions.”
The product also provides good extrusion and thixotropic properties from −40°C to +40°C. This supports defined application-performance descriptions but should not be presented as an unrestricted site-application range.
Solution | How Can Vertical Bead Formation Be Better Controlled?
Select the sealant output according to joint dimensions and move the application gun consistently to avoid localized material accumulation.
The measured extrusion rate of ≥420 mL/min provides an extrusion reference, while sag ≤3 mm describes vertical shape retention. The measured 0.5 h skin-over time can then guide the tooling stage.
Technical Data
|
Key Property |
Data |
Application Meaning |
|---|---|---|
|
Sag |
≤3 mm |
Vertical shape retention |
|
Extrusion |
Measured ≥420 mL/min |
Extrusion behavior |
|
Extrusion/Thixotropic Range |
−40°C to +40°C |
Defined performance range |
|
Skin-Over |
Measured 0.5 h |
Tooling reference |
|
Thickness |
Generally ≥6 mm |
Sealant-section reference |
|
Cure System |
Neutral cure |
Cure chemistry |
FAQ | Technical Questions About Vertical Application
Can ≤3 mm be described simply as “non-sag”?
Using the actual ≤3 mm test value is more technically precise.
Are thixotropy and extrusion the same property?
No. Extrusion describes material output, while thixotropic behavior relates to rheological response during and after application.
Can the bead be freely tooled after skin formation?
Tooling should be completed according to the actual surface formation condition.