Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Construction Silicone Sealant For Vertical Window Joints: One-Component System With Controlled Sag For Bead Formation
Problem | Why Are Vertical Window Joints More Difficult to Control?
Before curing, sealant applied vertically must retain its bead shape under gravity. Excessive downward movement may create thin upper sections, material accumulation below, and inconsistent bead geometry.
Cause | What Do Sag and Thixotropy Actually Describe?
338 has a sag value of ≤3 mm, providing a direct quantitative reference for vertical bead retention.
The product also has good extrusion and thixotropic properties from −40°C to +40°C. This range describes these specific properties and should not be presented as an unrestricted application-temperature range.
Solution | How Can Controlled Sag Improve Vertical Application?
Select the nozzle according to joint dimensions, clean the bonding surfaces, and maintain consistent gun movement.
The measured extrusion rate of ≥420 mL/min supports extrusion control, while sag ≤3 mm describes bead stability after application. The measured 0.5 h skin-over time provides a tooling reference.
Technical Data
|
Property |
Data |
Technical Meaning |
|---|---|---|
|
Sag |
≤3 mm |
Vertical bead control |
|
Extrusion |
Measured ≥420 mL/min |
Application reference |
|
Extrusion/Thixotropic Range |
−40°C to +40°C |
Defined performance range |
|
Skin-Over |
Measured 0.5 h |
Tooling reference |
|
Product Format |
One-component |
No mixing |
FAQ
Can ≤3 mm be described as zero sag?
No. Retaining the actual test value is more accurate.
Does controlled sag remove the need for proper joint design?
No. Joint dimensions still need to follow actual project design.
自定义属性⑭