Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Neutral Cure Silicone Sealant For Window-To-Wall Joints: Improving Joint Continuity And Application Control
Problem | Why Do Window-to-Wall Joints Develop Discontinuous Sealing?
Window frames and walls are different substrates, and the joint may include corners, uneven surfaces, and dimensional changes. A visible surface bead does not necessarily mean that the designed joint has been continuously filled.
Cause | Which Application Properties Affect Joint Continuity?
338 has a specified extrusion requirement of ≥150 mL/min and a measured result of ≥420 mL/min, providing quantitative evidence of extrusion behavior.
The ≤3 mm sag value helps evaluate vertical sections. However, contamination such as dust, moisture, or oil can still interfere with effective substrate contact even when extrusion is continuous.
Solution | How Can a Continuous Window-to-Wall Seal Be Formed?
Inspect and clean the entire joint before application and verify adhesion and compatibility on the actual materials.
Adjust gun movement and output according to changes in joint dimensions. A recommended thickness of generally ≥6 mm helps avoid locally thin sections, while the measured 0.5 h skin-over time provides a tooling reference.
Technical Data
|
Property |
Data |
Application Meaning |
|---|---|---|
|
Extrusion |
Measured ≥420 mL/min |
Continuous application |
|
Sag |
≤3 mm |
Vertical bead formation |
|
Skin-Over |
Measured 0.5 h |
Tooling reference |
|
Thickness |
Generally ≥6 mm |
Thin-section control |
|
Component |
One-component |
No mixing |
|
Cure Type |
Neutral cure |
Product system |
FAQ
Can an uneven wall simply be leveled by applying more sealant?
Not necessarily. Joint geometry should first be evaluated rather than masking substrate irregularities with additional surface material.
Does a continuous-looking surface prove continuous internal filling?
No. Corners, recesses, and dimensional transitions require additional inspection.