Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Neutral Cure Silicone Sealant for Window Corner Joints: One-Component System for Extrusion Control and Complete Joint Filling
Problem | Why Are Window Corner Joints Prone to Underfilling?
Corners require a clear change in application direction. If sealant output stops or gun speed changes during the transition, internal voids may form even when the tooled surface appears continuous.
Cause | Why Does Extrusion Behavior Matter at Corners?
338 has an extrusion requirement of ≥150 mL/min and a measured result of ≥420 mL/min, providing quantitative evidence of material output.
However, this does not guarantee complete corner filling because nozzle size, gun movement, and operator technique also affect the result. When the bead transitions vertically, sag ≤3 mm provides an additional shape-retention reference.
Solution | How Should Corner Joints Be Applied?
Clean and verify both substrates before application. Maintain sealant output while approaching the corner and change direction smoothly without creating an unnecessary interruption.
A thickness of generally ≥6 mm is recommended as a joint reference. After application, the measured 0.5 h skin-over time can guide tooling. Corners should be checked for pinholes, voids, and discontinuities.
Technical Data
|
Property |
Data |
Corner Relevance |
|---|---|---|
|
Extrusion Requirement |
≥150 mL/min |
Specified value |
|
Measured Extrusion |
≥420 mL/min |
Continuous output reference |
|
Sag |
≤3 mm |
Vertical transition control |
|
Thickness |
Generally ≥6 mm |
Thin-section prevention |
|
Skin-Over |
Measured 0.5 h |
Tooling reference |
FAQ
Does applying extra sealant automatically prevent corner underfilling?
No. Continuous filling and effective substrate contact are more important.
Is ≥420 mL/min the required sealant volume for a corner?
No. It is an extrusion test value, not a prescribed joint volume.