Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Construction Silicone Sealant for Vertical Window Application: One-Component System with Thixotropic Behavior for Bead Shape Control
Problem | Why Can Sealant Beads Change Shape During Vertical Window Application?
After extrusion, uncured sealant must retain its designed bead geometry. On vertical joints, gravity continues to act on the material before curing progresses, potentially causing downward movement, localized accumulation, or dimensional changes.
Cause | What Is the Difference Between Thixotropy and Sag?
Thixotropic behavior describes rheological response during and after shear, while sag provides a more direct reference for vertical shape change.
338 provides good extrusion and thixotropic properties from −40°C to +40°C, together with sag ≤3 mm. These values support application-performance analysis but should not be rewritten as an unrestricted application-temperature range or a “zero sag” claim.
Solution | How Can Thixotropic Behavior Support Vertical Application?
Confirm product storage and substrate conditions before use. 338 should be stored at ≤27°C in a dry, shaded environment. Clean and verify the actual substrates before application.
The measured extrusion rate of ≥420 mL/min describes material output under application, while sag ≤3 mm provides a reference for bead retention after extrusion. Extrusion, thixotropy, and sag should therefore be treated as related but distinct technical properties.
Technical Data
|
Property |
Data |
Performance Relevance |
|---|---|---|
|
Extrusion/Thixotropic Range |
−40°C to +40°C |
Defined rheological behavior |
|
Sag |
≤3 mm |
Vertical shape retention |
|
Extrusion |
Measured ≥420 mL/min |
Material output |
|
Skin-Over |
Measured 0.5 h |
Surface formation |
|
Storage |
≤27°C, dry and shaded |
Storage requirement |
FAQ
Does good thixotropy mean the sealant never flows?
No. Thixotropy describes rheological behavior; vertical shape retention should also be evaluated using sag data.
Is −40°C to +40°C the recommended application-temperature range?
No. The available information specifically associates this range with extrusion and thixotropic properties.