Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Neutral Cure Silicone Sealant For Building Window Joints: Evaluating Extrusion And Thixotropic Performance Under Different Temperatures
Problem | Why Does Temperature Matter During Window Joint Application?
Building window installation can take place under different seasonal conditions. Extrusion behavior and bead formation may vary with temperature, so application evaluation should consider more than whether the sealant is simply “easy to gun.”
Cause | What Does −40°C to +40°C Actually Mean?
The 338 product information states good extrusion and thixotropic properties from −40°C to +40°C. This range should therefore be associated specifically with these properties rather than presented as an unrestricted recommended application-temperature range.
Its extrusion requirement is ≥150 mL/min, with a measured result of ≥420 mL/min.
Solution | What Should Be Checked Under Different Temperature Conditions?
First check product storage. 338 should be stored at ≤27°C in a cool, dry environment, with a 9-month shelf life.
Before application, substrates should be clean and dry, with adhesion and compatibility verified. During application, extrusion continuity and vertical bead formation should also be checked. Sag ≤3 mm provides a quantitative reference for vertical application.
Technical Data
|
Property |
Data |
Meaning |
|---|---|---|
|
Extrusion/Thixotropic Range |
−40°C to +40°C |
Not an unrestricted application range |
|
Extrusion Requirement |
≥150 mL/min |
Specified requirement |
|
Measured Extrusion |
≥420 mL/min |
Extrusion reference |
|
Sag |
≤3 mm |
Vertical bead reference |
|
Storage |
≤27°C, cool and dry |
Storage requirement |
|
Shelf Life |
9 months |
Specified shelf life |
FAQ
Can −40°C to +40°C be listed as the application temperature?
Not based on the available information. It specifically describes extrusion and thixotropic performance.
Is successful extrusion enough to approve cold-weather application?
No. Substrate condition, adhesion, and actual project requirements should also be evaluated.