Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Thermal Break Window Sealant: How To Reduce Edge Separation And Discontinuous Corner Joints Around Window Frames
Problem | Why Can Thermal Break Window Perimeter Joints Develop Local Edge Separation?
After thermal break aluminum windows are installed, the frame perimeter requires a continuous joint with the adjoining construction surface.
Problems often develop locally at corners, lower-to-vertical frame transitions, uneven wall surfaces, or application restart points.
A visible surface bead does not necessarily confirm continuous contact with both substrates.
Cause | Why Are Multi-Directional Window Perimeter Joints More Difficult To Apply?
A complete frame perimeter combines upper and lower horizontal joints, two vertical joints, and four corners.
Applicator direction, nozzle position, and movement speed change repeatedly.
If horizontal and vertical beads are applied separately without complete corner connections, discontinuities can remain.
The available 995 instructions also require clean and dry bonding surfaces.
Solution | Which 995 Properties Are Relevant To Thermal Break Window Installation?
995 is a one-component, neutral cure silicone sealant with listed applications covering indoor and outdoor door and window bonding and sealing.
Its extrusion rate is ≥150 mL/min, providing a measurable reference for continuous frame-edge application.
For vertical frame joints, sag ≤3 mm provides a shape-retention reference.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C, while application temperature is 4–40°C.
Technical Data
|
Property |
Specification |
Application Relevance |
|---|---|---|
|
Product System |
One-Component Silicone |
Direct site application |
|
Cure Type |
Neutral Cure |
Neutral silicone system |
|
Extrusion Rate |
≥150 mL/min |
Continuous perimeter application |
|
Sag |
≤3 mm |
Vertical frame joints |
|
Tack-Free Time |
≤3 h |
Skin formation reference |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Application Temperature |
4–40°C |
Site application range |
How It Works | Why Should The Window Perimeter Be Treated As A Continuous Path?
The perimeter can be viewed as:
top frame → right side → bottom frame → left side → starting point.
Every corner is therefore part of the same sealing path rather than an isolated joint.
Application Scenarios | Where Can 995 Be Used On Thermal Break Windows?
Typical locations include thermal break aluminum window perimeters, frame-to-wall connections, horizontal and vertical frame edges, corners, and general installation joints.