Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
System Window Silicone Sealant: How To Reduce Joint Discontinuities And Application Variation Across Multiple Frame Connections
Problem | Why Can Bottom-To-Side Connections Become Weak Points Around Balcony Sliding Doors?
A balcony sliding door perimeter commonly includes a long bottom frame, two vertical side frames, and an upper frame.
The two lower corners connect horizontal and vertical joints and therefore require particular attention.
In exterior or semi-exterior locations, local discontinuities can create potential water-entry paths into the installation joint.
Cause | Why Are Long Bottom Frames And Vertical Side Connections Difficult To Apply Continuously?
Sliding door bottom frames can be relatively long, requiring consistent material delivery over a longer distance.
At each end, application direction changes from horizontal to vertical.
Stopping and restarting at these transitions can create discontinuities.
The bonding surfaces should also be clean and dry before application.
Solution | How Can ≥150 mL/min Extrusion Support Long Sliding Door Bottom Joints?
995 is a one-component, neutral cure silicone sealant.
Its extrusion rate of ≥150 mL/min provides a measurable reference for continuous application along long bottom-frame joints.
When application transitions to the vertical side frames, sag ≤3 mm provides a shape-retention reference.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C, with an application temperature range of 4–40°C.
Technical Data
|
Property |
Specification |
Application Relevance |
|---|---|---|
|
Extrusion Rate |
≥150 mL/min |
Long bottom-frame application |
|
Sag |
≤3 mm |
Vertical side-frame joints |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Tack-Free Time |
≤3 h |
Skin formation |
|
Application Temperature |
4–40°C |
Site application range |
|
Cure Type |
Neutral Cure |
Neutral silicone system |
|
Component |
One Component |
No field mixing |
How It Works | Why Should Bottom And Side Frame Joints Form One Continuous Sealing Path?
The lower perimeter can be viewed as:
left side frame → lower-left corner → bottom frame → lower-right corner → right side frame.
A discontinuity at either corner interrupts this path even when the central bottom bead appears complete.
Application Scenarios | Where Can 995 Be Used Around Balcony Sliding Doors?
Typical locations include balcony sliding door perimeters, aluminum bottom frames, vertical side frames, frame-to-wall or floor connections, and lower corner installation joints.