Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
System Window Silicone Sealant: How To Reduce Joint Discontinuities And Application Variation Across Multiple Frame Connections
Problem | Why Can One Local Joint Issue Affect A Complete System Window Perimeter?
System window installation involves multiple connections between frames, glazing components, profiles, and adjoining construction surfaces.
In batch projects, different installers may use different extrusion speeds, applicator movements, and corner treatments.
The technical challenge is therefore not only selecting a sealant, but establishing more consistent application references across multiple joint types.
Cause | Why Do System Window Projects Benefit From Quantitative Application Data?
General descriptions such as “easy to apply” or “good anti-sag performance” are difficult to standardize.
Horizontal frame edges require continuous extrusion, vertical joints require shape retention, and corners require continuous bead connections.
Measurable properties provide clearer references for these different conditions.
Solution | Which 995 Specifications Can Support System Window Application Control?
995 is a one-component, neutral cure silicone sealant.
Its extrusion rate is ≥150 mL/min, while specified sag is ≤3 mm.
The tack-free time is ≤3 h, and the specified application temperature range is 4–40°C.
Tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C under the specified test conditions.
Technical Data
|
Property |
Specification |
Project Relevance |
|---|---|---|
|
Extrusion Rate |
≥150 mL/min |
Long-edge application |
|
Sag |
≤3 mm |
Vertical frame joints |
|
Tack-Free Time |
≤3 h |
Skin formation |
|
Application Temperature |
4–40°C |
Site condition range |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Component |
One Component |
Direct application |
|
Cure Type |
Neutral Cure |
Neutral silicone system |
How To Choose | Why Compare Extrusion, Sag And Application Temperature Together?
These specifications describe different parts of site application.
≥150 mL/min extrusion relates to material output, ≤3 mm sag relates to vertical shape retention, and 4–40°C defines the specified application temperature range.
Together, they provide a more technical basis for B2B selection than general performance descriptions.
Application | Where Can 995 Be Used In System Window Installation?
Typical locations include system window perimeters, frame-to-wall joints, horizontal and vertical frame edges, relevant glazing joints, and frame corner connections.