Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Aluminum Window Sealant For Glass Installation: How To Reduce Adhesion Failure Between Glass And Window Frames
Problem | Why Can Sealant Separate From Glass Or Aluminum Frames Even When The Silicone Itself Has Not Cracked?
In window applications, the silicone bead may remain physically intact while separating from either the glass or aluminum profile. In this situation, the failure occurs primarily at the sealant-to-substrate interface rather than within the sealant itself.
If inspection focuses only on visible cracking, interface failure may be overlooked. As the separated area expands, the continuous sealing path can be interrupted and water may enter along the failed interface.
Cause | How Can Glass Residues, Aluminum Surface Treatments And Contamination Cause Adhesion Failure?
Sealant needs direct contact with the actual substrate. Cleaner residue, oil films, dust, processing oils, or other contaminants may create an intermediate layer between the silicone and the bonding surface.
Aluminum surfaces can also vary according to their finishing or treatment process. Therefore, a general statement that a sealant is suitable for aluminum should not replace testing with the actual project material.
Solution | How Can Tensile Adhesion Data And Actual Substrate Testing Help Reduce Separation Between Glass And Aluminum Frames?
995 is a one-component neutral cure silicone system suitable for sealing applications involving glass, aluminum, and other stated construction materials.
Its specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C. These values provide defined test-condition data instead of relying on an unsupported general claim of “strong adhesion.”
Before application, glass and aluminum bonding areas should be properly cleaned. Specially treated aluminum profiles should be evaluated through adhesion and compatibility testing using the actual project substrates before large-scale installation.
Technical Data | Which 995 Data Should Be Reviewed For Glass-To-Aluminum Window Sealing?
|
Property |
Specification |
Technical Relevance |
|---|---|---|
|
Cure System |
Neutral Cure |
Silicone curing system |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature test data |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature test data |
|
Sag |
≤3 mm |
Vertical application reference |
|
Extrusion Rate |
≥150 mL/min |
Continuous application reference |
|
Tack-Free Time |
≤3 h |
Skin formation reference |
|
Application Temperature |
4–40°C |
Application condition control |
|
Standard |
JC/T 485-2007 |
Standard stated in product information |
How To Choose | Why Should Glass And Aluminum Window Sealant Selection Consider More Than General Material Compatibility?
“Aluminum” does not represent one identical bonding surface. Coatings, surface treatments, and contamination conditions can influence actual adhesion.
Sealant selection should therefore consider the cure system, tensile adhesion data, application temperature, and actual substrate test results together. Testing project-specific glass and aluminum materials provides more useful information than relying only on a generic material description.
FAQ | Does Good Adhesion To Glass Mean 995 Will Automatically Bond To Every Aluminum Profile?
Q: If adhesion to glass is acceptable, can the same result be assumed for aluminum?
No. Glass and aluminum are different bonding interfaces and should be evaluated separately.
Q: Why can two aluminum window profiles produce different adhesion results?
Surface finishing, coating systems, and contamination conditions may differ, so project-specific testing is recommended.