Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Silicone Sealant For Window Installation: How To Reduce Joint Sealing Failure Under Temperature Changes
Problem | Why Can The Same Window Sealant Show Different Application And Adhesion Issues In Winter And Summer?
Window installation projects performed across different seasons may experience changes in extrusion behavior, working conditions, and substrate moisture. If installers follow the same application procedure without checking temperature and substrate condition, discontinuous filling or incomplete bonding interfaces may occur.
During colder conditions, aluminum window profiles may also develop condensation. Even when the surrounding temperature appears acceptable, moisture on the actual bonding surface can interfere with direct contact between the silicone and substrate.
Cause | How Do Application Temperature, Surface Condensation And Continuous Extrusion Affect Window Joint Quality?
Silicone sealant is influenced by site conditions during extrusion, tooling, and curing. Temperature affects application conditions, while moisture, dust, and oil can directly interfere with substrate contact.
Window perimeter joints are also relatively long. Frequent interruptions or an inconsistent relationship between gun movement and sealant output can create weak points at corners and bead connections.
For temperature-related window applications, three factors should therefore be distinguished: specified application temperature, performance data obtained at different test temperatures, and the actual condition of the substrate during installation.
Solution | How Can The 4–40°C Application Range And Tensile Adhesion Data Be Used To Control Seasonal Window Installation?
The specified application temperature for 995 is 4–40°C. Site conditions and substrate temperature should therefore be considered before application rather than describing the product as unrestricted by temperature.
Its specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C. The -20°C value represents a performance test condition; it does not mean that the sealant can be applied at -20°C.
The product also has an extrusion rate of ≥150 mL/min and sag of ≤3 mm, providing references for continuous application and vertical joint shape retention respectively.
Technical Data | How Should The Application Temperature And Low-Temperature Test Data Be Interpreted For Window Installation?
|
Property |
Specification |
Application Relevance |
|---|---|---|
|
Application Temperature |
4–40°C |
Specified application range |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature test reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature test reference |
|
Extrusion Rate |
≥150 mL/min |
Continuous application reference |
|
Sag |
≤3 mm |
Vertical joint shape retention reference |
|
Tack-Free Time |
≤3 h |
Surface skin formation reference |
|
System |
One-Component, Neutral Cure |
No two-component mixing required |
|
Standard |
JC/T 485-2007 |
Standard stated in product information |
How To Choose | Why Should Winter And Summer Window Projects Distinguish Application Temperature From Low-Temperature Performance?
Performance at a low test temperature and application at a low site temperature are not the same technical concept.
Although 995 has a specified tensile adhesion value of >0.6 MPa at -20°C, its stated application temperature remains 4–40°C. The -20°C test result should therefore not be used to claim that the sealant can be applied at -20°C.
In winter, condensation on glass or aluminum should also be checked. In all seasons, the bonding surfaces should be clean and dry before sealant application.
FAQ | Common Questions About Low-Temperature Testing, Winter Application And Condensation On Window Frames
Q: Can 995 be applied at -20°C because it has tensile adhesion data at -20°C?
No. The specified application temperature is 4–40°C. The -20°C value is a performance test condition.
Q: Can sealant be applied if an aluminum frame has condensation on its surface?
The bonding surface should be clean and dry before application.