Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Window Silicone Sealant For Glass Installation: How To Reduce Adhesion Failure Between Glass And Aluminum Frames
Problem | Why Can Window Sealant Separate From Glass Or Aluminum Even When The Silicone Bead Itself Has Not Cracked?
In glass window applications, the silicone bead may remain intact while gradually separating from either the glass or aluminum profile. This is different from cohesive cracking because the primary failure occurs at the sealant-to-substrate interface.
Once interface adhesion is interrupted, the continuous sealing path has already been weakened even if the exposed silicone surface remains visually intact.
Water, air, or contamination may then move along the separated interface. For this reason, glass window adhesion should not be evaluated only by the appearance or hardness of the cured sealant.
Cause | How Do Glass Cleaning Residues, Aluminum Surface Treatments And Moisture Affect Silicone Adhesion?
A sealant needs direct contact with the glass and aluminum surfaces to develop effective adhesion.
Cleaner residue, oil films, dust, processing oils, or other contaminants may form an intermediate layer between the silicone and the actual substrate. Aluminum profiles can also vary according to coating or surface treatment.
Moisture on the bonding surface can create another barrier. Therefore, a general statement that a silicone sealant is suitable for glass and aluminum should not replace testing with the actual project substrates.
Solution | How Can 23°C And -20°C Tensile Adhesion Data Be Combined With Project-Specific Testing To Reduce Interface Failure?
995 is a one-component, neutral cure silicone sealant intended for sealing applications involving glass, aluminum, and window joints.
Its specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C. These values provide quantitative adhesion references under defined test temperatures, but they do not replace actual substrate testing.
Before installation, glass and aluminum bonding areas should be cleaned separately and evaluated with the actual project materials. Specially treated aluminum profiles require particular attention to adhesion and compatibility.
Technical Data | Which 995 Parameters Provide Direct Reference For Glass-To-Aluminum Window Adhesion?
|
Property |
Specification |
Technical Relevance |
|---|---|---|
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature adhesion reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature adhesion reference |
|
Cure System |
Neutral Cure |
Neutral silicone system |
|
Component |
One Component |
Direct application |
|
Sag |
≤3 mm |
Glass side-joint application reference |
|
Extrusion Rate |
≥150 mL/min |
Continuous application reference |
|
Application Temperature |
4–40°C |
Site condition control |
|
Standard |
JC/T 485-2007 |
Standard stated in product information |
How To Choose | Why Should Glass And Aluminum Be Evaluated Separately When Selecting Window Silicone Sealant?
Glass and aluminum represent different bonding interfaces. Acceptable adhesion to one substrate does not automatically guarantee identical adhesion to the other.
Actual project glass and aluminum profiles should therefore be evaluated separately. Coated or specially treated aluminum requires additional attention because surface conditions can directly influence adhesion.
Product data such as tensile adhesion, cure system, and application temperature should be considered together with project-specific substrate testing.
FAQ | Does Good Adhesion To Glass Mean The Same Sealant Can Be Used On Every Aluminum Window Profile?
Q: If 995 bonds well to glass, can the same result be assumed for aluminum?
No. The two substrates should be evaluated separately.
Q: Why can different aluminum profiles produce different adhesion results?
Coatings, surface treatments, and contamination conditions may differ between profiles.