Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Aluminum Window Sealant: How To Reduce Adhesion Failure Through Better Substrate Preparation And Application Control
Problem | Why Can Silicone Sealant Peel Away From An Aluminum Window Profile While The Sealant Bead Remains Intact?
During inspection, a section of sealant may sometimes be pulled away from the aluminum profile while the silicone bead itself remains largely intact.
This indicates an interface-related problem rather than failure through the body of the sealant. Aluminum surface condition, preparation, and actual substrate adhesion should therefore be investigated.
Simply applying another layer over a failed interface may leave the original weak bond unchanged.
Cause | How Can Aluminum Coatings, Processing Oils And Surface Moisture Cause Adhesion Failure?
Aluminum window profiles do not all present identical bonding surfaces. Different coatings, finishes, and surface treatments can change the actual interface contacted by the sealant.
Processing oils, dust, and other contamination may also remain after manufacturing, transportation, or installation.
Rainwater, condensation, or incomplete drying after cleaning can introduce moisture at the interface and interfere with direct sealant-to-aluminum contact.
Solution | How Can Actual Aluminum Profile Testing And 995 Tensile Adhesion Data Help Reduce Interface Separation?
995 is a one-component, neutral cure silicone system intended for sealing applications involving common construction materials, windows, and glass.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C, providing quantitative references under defined test conditions.
These values do not mean that every aluminum surface can be used without verification. Coated or specially treated profiles should be tested using actual project materials before large-scale application.
Technical Data | Which 995 Data And Application Conditions Should Be Reviewed When Aluminum Interface Failure Occurs?
|
Property |
Specification |
Relevance |
|---|---|---|
|
Cure System |
Neutral Cure |
Product system |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature test reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature test reference |
|
Application Temperature |
4–40°C |
Site application conditions |
|
Extrusion Rate |
≥150 mL/min |
Continuous application reference |
|
Sag |
≤3 mm |
Vertical application reference |
|
Tack-Free Time |
≤3 h |
Skin formation reference |
|
Standard |
JC/T 485-2007 |
Standard stated in product information |
How It Works | Why Is Testing The Actual Aluminum Profile More Useful Than Relying Only On A “Suitable For Aluminum” Description?
“Aluminum” describes a substrate category, but not the complete bonding surface. The sealant actually contacts the coating, treatment layer, or finished surface of the profile.
Project-specific testing therefore evaluates the real combination of sealant + actual aluminum surface.
If the profile supplier, coating, or surface treatment changes, adhesion should be reviewed again rather than assuming the previous result automatically applies.
Application | Which Aluminum Window Locations Should Be Checked When Sealant Separation Occurs?
Key areas include window perimeter joints, glass-to-aluminum interfaces, frame corners, vertical frame edges, and connections between separate sealant beads.
If separation repeatedly occurs on the aluminum side while adhesion to the glass remains intact, the aluminum surface condition and preparation should receive particular attention.