Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
How To Choose Window Silicone Sealant: Why Cure System, Adhesion Data And Application Temperature All Matter
Problem | Why Is A Product Name Such As “Window Sealant” Or “Neutral Cure Silicone” Not Enough To Confirm Project Suitability?
Product names help identify a general application category, but they do not fully describe how a sealant will perform with a specific window profile, glass type, coating, or installation environment.
Even aluminum window systems may use different surface treatments and finishes.
For this reason, product selection should not rely only on the name. Cure system, adhesion data, application temperature, and actual substrate compatibility should also be reviewed.
Cause | Why Should Cure System, Substrate Condition And Application Temperature Be Evaluated Together?
Sealant must be extruded, bonded, and cured under actual installation conditions.
The cure system defines the basic chemistry. The substrate condition influences direct sealant contact, while the application temperature determines whether the material is being used within its specified installation range.
For example, the >0.6 MPa tensile adhesion value at -20°C is a test result. It does not mean that the sealant should be applied at -20°C. The specified application temperature is 4–40°C.
Solution | What Should Be Checked When Selecting 995 For Window Sealing?
First, confirm that 995 is a one-component, neutral cure silicone sealant.
Second, review its tensile adhesion data: >0.4 MPa at 23°C and >0.6 MPa at -20°C.
Third, review application-related properties including sag ≤3 mm, extrusion ≥150 mL/min, tack-free time ≤3 h, and an application temperature of 4–40°C.
Finally, verify adhesion and compatibility with actual project substrates.
Technical Data | Which 995 Specifications Can Be Directly Reviewed During Window Sealant Selection?
|
Property |
Specification |
Selection Relevance |
|---|---|---|
|
Product System |
One-Component Silicone |
Basic material system |
|
Cure Type |
Neutral Cure |
Cure-system confirmation |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature test reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature test reference |
|
Sag |
≤3 mm |
Vertical joint reference |
|
Extrusion Rate |
≥150 mL/min |
Continuous application reference |
|
Tack-Free Time |
≤3 h |
Surface skin formation reference |
|
Application Temperature |
4–40°C |
Site application range |
How To Choose | What Technical Sequence Can Be Used When Selecting 995 For Window Projects?
A practical sequence is product system → actual substrate → application temperature → adhesion data → application properties → project-specific adhesion testing.
If special coated glass or treated aluminum profiles are used, actual sample testing becomes particularly important.
If the project requires a defined movement rating, UV-aging duration, or airtightness classification, corresponding test documentation should be requested separately because these values are not provided in the current 995 information.
FAQ | Does A Higher Individual Specification Automatically Mean Better Suitability For Every Window Project?
No. Sealant selection should not be based on one number alone.
Adhesion data cannot replace proper surface preparation, and extrusion performance does not represent a certified waterproofing or airtightness rating.