Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
How To Choose System Window Sealant: What To Check From Substrate Compatibility To JC/T 485-2007
Problem | Why Can Important Verification Steps Still Be Missed When Selecting Sealant For System Windows?
System windows combine glass, aluminum profiles, weatherstripping, connection components, and perimeter construction joints.
If sealant selection relies mainly on marketing terms such as “system window sealant” or “high performance,” important technical details may be overlooked.
Different aluminum finishes can produce different bonding conditions, while actual site temperatures may also affect application.
Cause | Why Do Product Standards, Tensile Adhesion Data And Actual Substrate Testing Serve Different Purposes?
A product standard provides a technical reference, but it does not replace specific performance data or project-material verification.
The 995 product information states JC/T 485-2007 and also provides tensile adhesion, sag, extrusion, and application-temperature data.
These elements address different questions: the standard identifies a technical basis, adhesion data describe performance under specified test conditions, and project testing evaluates the actual combination of sealant and substrate.
Solution | How Can A Four-Step “Standard–Data–Substrate–Application” Process Be Used For 995?
First, review the product system and stated standard. 995 is a one-component, neutral cure silicone sealant, with JC/T 485-2007 stated in the product information.
Second, check tensile adhesion: >0.4 MPa at 23°C and >0.6 MPa at -20°C.
Third, review application properties: sag ≤3 mm, extrusion ≥150 mL/min, tack-free time ≤3 h, and application temperature 4–40°C.
Fourth, perform adhesion and compatibility checks using actual system-window glass and aluminum profiles.
Technical Data | Which 995 Items Should Be Included In A System Window Technical Review?
|
Review Item |
995 Information |
Main Purpose |
|---|---|---|
|
Product System |
One-Component, Neutral Cure |
Confirm material system |
|
Standard |
JC/T 485-2007 |
Technical-document reference |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature test reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature test reference |
|
Sag |
≤3 mm |
Vertical application reference |
|
Extrusion Rate |
≥150 mL/min |
Continuous application reference |
|
Tack-Free Time |
≤3 h |
Skin formation reference |
|
Application Temperature |
4–40°C |
Site application range |
How It Works | Why Should System Window Sealant Selection Verify Both Product Data And Actual Project Materials?
Product values come from defined test conditions, while the project uses specific profiles, glass, coatings, and site conditions.
Two projects may both use aluminum frames but present different bonding surfaces due to different finishes.
Technical data therefore support initial screening, while actual substrate testing provides project-specific verification.
FAQ | Does A JC/T 485-2007 Reference Mean 995 Can Automatically Be Used On Every System Window Project?
No.
The standard reference is only one part of the technical review. Substrates, joint conditions, application temperature, and project-specific requirements should also be evaluated.