Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Problem | Why Can Long Vertical Window Joints Develop Uneven Bead Geometry?
The left and right sides of a window frame commonly create long vertical joints with adjoining construction surfaces.
Unlike horizontal joints, vertical application requires both continuous material delivery and shape retention before cure.
Changes in applicator speed can produce excessive or insufficient local filling.
Cause | Why Must Material Output And Post-Application Shape Be Considered Together?
After extrusion, the sealant requires time for skin formation and further curing.
During this period, the applied material needs to retain its basic geometry.
Moving too quickly may reduce filling, while excessive local material can affect bead uniformity. Vertical-joint application therefore depends on extrusion, applicator speed, joint dimensions, and sag behavior.
Solution | Why Is ≤3 mm Sag Relevant To Window Installation?
995 has a specified sag value of ≤3 mm, providing a measurable reference for vertical window joints.
The product also has an extrusion rate of ≥150 mL/min, tack-free time of ≤3 h, and specified application temperature of 4–40°C.
Tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C under the specified test conditions.
Technical Data
|
Property |
Specification |
Relevance |
|---|---|---|
|
Sag |
≤3 mm |
Vertical shape retention |
|
Extrusion Rate |
≥150 mL/min |
Continuous application |
|
Tack-Free Time |
≤3 h |
Skin formation |
|
Application Temperature |
4–40°C |
Site application range |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Test reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Test reference |
|
Component |
One Component |
Direct application |
|
Cure Type |
Neutral Cure |
Neutral silicone system |
How To Choose | Why Should Sag Be Compared For Vertical Window Joints?
For vertical frame applications, measurable properties provide more useful technical guidance than general claims such as “easy to apply.”
995 combines ≤3 mm sag with ≥150 mL/min extrusion, allowing both properties to be evaluated together.
Application | Which Vertical Door And Window Joints Can Use 995?
Typical locations include window side frames, vertical door-frame edges, long frame-to-wall joints, and general vertical door and window installation joints.