Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Window Frame Waterproof Sealant: How To Reduce Incomplete Filling And Rainwater Entry At Lower Frame Joints
Problem | Why Is The Lower Window Frame Joint An Important Sealing Detail?
The connection between the lower frame and sill or adjoining construction surface forms part of the window perimeter joint.
Exterior windows may be exposed to rain. Local bead gaps, incomplete filling, or edge separation can therefore create potential water-entry paths into the installation joint.
Areas requiring particular attention include lower corners, lower-to-vertical frame transitions, and uneven sill surfaces.
Cause | Why Can A Visible Lower-Frame Bead Still Contain Weak Points?
A visible surface bead does not automatically confirm complete filling or continuous substrate contact.
Surface contamination or moisture may interfere with direct contact, while incomplete connections between horizontal and vertical beads can interrupt the perimeter sealing path.
Solution | Which 995 Properties Support Lower Window Frame Sealing?
995 is a one-component, neutral cure silicone sealant listed for indoor and outdoor door and window bonding and sealing applications.
Its extrusion rate is ≥150 mL/min, providing a reference for continuous application along longer horizontal frame joints.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C, and the application temperature range is 4–40°C.
These specifications support technical discussion of application and tested adhesion properties without extending them into unsupported permanent-waterproofing or service-life claims.
Technical Data
|
Property |
Specification |
Relevance |
|---|---|---|
|
Cure Type |
Neutral Cure |
Neutral silicone system |
|
Extrusion Rate |
≥150 mL/min |
Long lower-frame application |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Sag |
≤3 mm |
Vertical connection points |
|
Tack-Free Time |
≤3 h |
Skin formation |
|
Application Temperature |
4–40°C |
Site application conditions |
|
Component |
One Component |
Direct application |
How It Works | Why Should The Lower Frame Connect Continuously With Both Vertical Joints?
The complete window perimeter functions as a connected joint system.
The lower horizontal bead should therefore connect continuously with the left and right vertical frame joints rather than being treated as an isolated section.
Application Scenarios | Where Can 995 Be Used Around Lower Window Frames?
Typical areas include aluminum lower window frames, frame-to-sill connections, lower frame-to-wall joints, lower corners, and general indoor or outdoor window installation joints.