Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Window Frame Waterproof Sealant: How To Reduce Incomplete Filling And Rainwater Entry At Lower Frame Joints
Problem | Why Can One-Sided Adhesion Failure Develop Between Glass And Aluminum Window Frames?
In window glazing applications, sealant is commonly placed between the glass edge and aluminum profile.
Failure does not always occur through the center of the silicone bead. The sealant may remain intact while separating locally from either the glass or aluminum side.
Corners, lower vertical sections, and bead connection points are especially important.
Cause | Why Should Glass And Aluminum Be Evaluated Separately?
Glass and aluminum represent different bonding surfaces.
Glass may retain cleaner residue, moisture, or dust, while aluminum profiles can contain processing residue or surface-treatment layers.
Good adhesion to one surface does not automatically confirm complete adhesion to the other.
Solution | How Can 995 Support Glass-To-Aluminum Window Joints?
995 is a one-component, neutral cure silicone sealant suitable for relevant window and glass sealing applications.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C.
The extrusion rate of ≥150 mL/min supports continuous application along longer glass edges, while sag ≤3 mm provides a reference for vertical side joints.
Technical Data
|
Property |
Specification |
Relevance |
|---|---|---|
|
Product System |
One-Component Silicone |
Direct application |
|
Cure Type |
Neutral Cure |
Neutral silicone system |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Extrusion Rate |
≥150 mL/min |
Glass-edge application |
|
Sag |
≤3 mm |
Vertical glass joints |
|
Tack-Free Time |
≤3 h |
Skin formation |
|
Application Temperature |
4–40°C |
Site application range |
How It Works | Why Must Both Glass And Aluminum Interfaces Remain Bonded?
The joint can be represented as:
glass → 995 sealant → aluminum profile.
Separation from either side creates an incomplete joint even when the central bead appears intact.
Application Scenarios | Where Can 995 Be Used Around Window Glass?
Typical locations include glass-to-aluminum frame joints, glass perimeters, sash glazing joints, fixed glass edges, and general door and window glazing applications.