Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Aluminum Window Sealant: How To Reduce Bead Gaps And Incomplete Filling At Window Frame Corners
Problem | Why Are Window Frame Corners More Sensitive Than Straight Joint Sections?
Window perimeters consist of horizontal and vertical joints connected through 90-degree corners.
Each direction change requires the applicator to reposition the nozzle and control material delivery.
If application stops and restarts at the corner, the visible beads may touch while internal continuity remains incomplete.
Cause | Why Do Corners Create More Start/Stop And Filling Variations?
Changing direction affects nozzle angle, movement speed, and output control.
Moving too quickly can reduce filling, while pausing too long can create local buildup.
The adjoining aluminum and construction surfaces must also remain clean and dry.
Solution | How Can 995 Extrusion Support Continuous Corner Application?
995 is a one-component, neutral cure silicone sealant with a specified extrusion rate of ≥150 mL/min.
This provides a measurable reference for continuous material delivery.
Its sag value of ≤3 mm is relevant where the corner transitions into vertical frame joints.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C, with an application temperature range of 4–40°C.
Technical Data
|
Property |
Specification |
Relevance |
|---|---|---|
|
Extrusion Rate |
≥150 mL/min |
Corner continuity reference |
|
Sag |
≤3 mm |
Vertical corner connections |
|
Tack-Free Time |
≤3 h |
Skin formation |
|
Application Temperature |
4–40°C |
Site application range |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Test reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Test reference |
|
Cure Type |
Neutral Cure |
Neutral silicone system |
|
Component |
One Component |
Direct application |
How It Works | Why Should Horizontal And Vertical Beads Be Treated As One Continuous Path?
The corner is part of the complete frame perimeter, not two separate joints.
A better application sequence is:
horizontal frame → corner → vertical frame
with continuous material connection through the transition.
Application | Where Can 995 Be Used Around Window Frame Corners?
Typical locations include aluminum window corners, door-frame corners, horizontal-to-vertical frame transitions, lower-frame corners, and general door and window frame joints.