Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Door Frame Silicone Sealant: How To Reduce Sag And Edge Separation At Door Frame-To-Wall Joints
Problem | Why Can Long Door Frame Joints Develop Sag And Uneven Edges?
Entrance doors, balcony doors, and other building door frames often create long vertical joints with adjoining walls.
Before full cure, the sealant must retain its applied position and geometry.
Downward movement can create thinner upper sections and heavier buildup lower down.
Cause | Why Do Long Vertical Door Joints Magnify Application Variations?
Longer joints require sustained control of applicator pressure and movement.
Stops, grip adjustments, or nozzle-angle changes can create bead-width variations.
The sealant must also maintain contact with both the door frame and wall surface.
Solution | Why Is ≤3 mm Sag A Key 995 Parameter For Door Frame Joints?
995 has a specified sag value of ≤3 mm, providing a measurable reference for long vertical door joints.
It also provides an extrusion rate of ≥150 mL/min, tack-free time ≤3 h, and an application temperature range of 4–40°C.
Specified tensile adhesion is >0.4 MPa at 23°C and >0.6 MPa at -20°C.
Technical Data
|
Property |
Specification |
Relevance |
|---|---|---|
|
Sag |
≤3 mm |
Long vertical shape retention |
|
Extrusion Rate |
≥150 mL/min |
Continuous application |
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature reference |
|
Tack-Free Time |
≤3 h |
Skin formation |
|
Application Temperature |
4–40°C |
Site application range |
|
Cure Type |
Neutral Cure |
Neutral silicone system |
|
Component |
One Component |
Direct application |
How To Choose | Why Compare Both Sag And Extrusion For Door Frame Joints?
These properties describe different parts of application performance.
≤3 mm sag relates to vertical shape retention, while ≥150 mL/min extrusion relates to continuous material output.
Both are relevant for long door-frame joints.
Application Scenarios | Where Can 995 Be Used Around Door Frames?
Typical areas include entrance door sides, balcony door frames, frame-to-wall joints, long vertical frame joints, and general building door installation sealing.