Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Silicone Sealant For Window Installation: How To Reduce Joint Cracking And Sealing Failure Under Temperature Changes
Problem | Why Can Window Joints Look Normal After Installation But Develop Local Cracking After Daily And Seasonal Temperature Changes?
Immediately after installation, window frames, glass, and sealant may appear stable. During service, however, aluminum profiles, glass, and adjoining construction materials experience repeated temperature changes.
Because these materials do not respond identically to temperature, the joints between them are subjected to repeated dimensional changes.
Locally thin sealant, incomplete filling, or incomplete adhesion can become weak areas where stress is concentrated.
Cause | How Do Thermal Movement, Uneven Sealant Dimensions And Incomplete Adhesion Increase Joint Failure Risk?
Window sealant connects different substrates. As aluminum and glass respond to temperature changes, the sealant joint needs to maintain continuity between them.
A thin surface layer or incompletely filled joint may concentrate stress in a limited section.
Dust, oil, moisture, and special surface treatments can also interfere with interface adhesion, potentially causing separation even when the silicone bead itself remains intact.
Solution | How Can Low-Temperature Adhesion Data And The 4–40°C Application Range Be Used Correctly?
995 provides specified tensile adhesion of >0.4 MPa at 23°C and >0.6 MPa at -20°C.
However, these values must be distinguished from application conditions. -20°C is a tensile adhesion test condition, while the specified application temperature is 4–40°C.
For windows exposed to significant temperature changes, joint filling and actual substrate adhesion should also be evaluated using project materials.
Technical Data | How Should 995 Temperature And Adhesion Data Be Interpreted For Window Joints?
|
Property |
Specification |
Technical Meaning |
|---|---|---|
|
Tensile Adhesion at 23°C |
>0.4 MPa |
Room-temperature test reference |
|
Tensile Adhesion at -20°C |
>0.6 MPa |
Low-temperature test reference |
|
Application Temperature |
4–40°C |
Actual application range |
|
High/Low Temperature Performance |
Stated in product information |
Temperature-change reference |
|
Sag |
≤3 mm |
Vertical application reference |
|
Extrusion Rate |
≥150 mL/min |
Continuous filling reference |
|
Tack-Free Time |
≤3 h |
Skin formation reference |
|
Cure System |
Neutral Cure |
Neutral silicone system |
How It Works | Why Can Temperature Changes Expose Weak Sections In Window Sealant Joints?
Temperature variation does not automatically mean that a joint will crack. The problem becomes more significant when temperature-related movement acts on an existing weak point.
Incomplete filling, thin sealant sections, or interface separation can become locations where stress is concentrated.
Sealant performance, joint geometry, substrate preparation, and installation quality should therefore be evaluated together.
FAQ | Does The -20°C Adhesion Test Mean 995 Can Be Applied Below Freezing?
No. The -20°C value describes a tensile adhesion test condition. The specified application temperature is 4–40°C.